[PATCH v2 0/4] Add USB Phy driver and binding changes for Qualcomm Shikra SoC

[Vinod Koul]

On 04-05-26, 22:36, Krishna Kurapati wrote:
> This series adds Driver and binding changes for USB Phys on Shikra. There
> are two USB controllers - One of them is SS capable and other is highspeed
> only capable. The ss Phy init sequence is same as that of Talos.

Please check https://sashiko.dev/#/patchset/20260504170659.282532-1-krishna.kurapati%40oss.qualcomm.com

> 
> Changes in v2:
> - Separated the usb controller binding changes
> - Updated commit texts.
> 
> Krishna Kurapati (4):
>   dt-bindings: phy: qcom,qusb2: Document QUSB2 Phy for Shikra
>   dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: Add support for Shikra
>   phy: qcom-qusb2: Add support for Shikra
>   phy: qcom: qmp-usbc: Add qmp configuration for Shikra
> 
>  .../bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml  |  2 ++
>  .../devicetree/bindings/phy/qcom,qusb2-phy.yaml  |  1 +
>  drivers/phy/qualcomm/phy-qcom-qmp-usbc.c         |  3 +++
>  drivers/phy/qualcomm/phy-qcom-qusb2.c            | 16 ++++++++++++++++
>  4 files changed, 22 insertions(+)
> 
> -- 
> 2.34.1

-- 
~Vinod