[PATCH 09/10] phy: qcom-qmp: pcs-pcie: Add v10.60 register offsets

Matthew Leung matthew.leung at oss.qualcomm.com
Fri May 8 16:31:24 PDT 2026


Hawi SoC uses QMP phy with version v10.60 for PCIe Gen4 x1. Add the new
PCS PCIe specific offsets in a dedicated header file.

Signed-off-by: Matthew Leung <matthew.leung at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c           |  1 +
 .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h    | 26 ++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index ba17e53d000f..fb66e2a97ce0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -41,6 +41,7 @@
 #include "phy-qcom-qmp-pcs-pcie-v8.h"
 #include "phy-qcom-qmp-qserdes-txrx-pcie-v8.h"
 #include "phy-qcom-qmp-pcs-pcie-v10.h"
+#include "phy-qcom-qmp-pcs-pcie-v10_60.h"
 
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h
new file mode 100644
index 000000000000..e4a2bdc7c3f0
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V10_60_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V10_60_H_
+
+/* Only for QMP V10_60 PHY - PCIE PCS registers */
+#define QPHY_PCIE_V10_60_PCS_POWER_STATE_CONFIG2		0x00c
+#define QPHY_PCIE_V10_60_PCS_PCS_TX_RX_CONFIG			0x018
+#define QPHY_PCIE_V10_60_PCS_ENDPOINT_REFCLK_DRIVE		0x01c
+#define QPHY_PCIE_V10_60_PCS_OSC_DTCT_ACTIONS			0x090
+#define QPHY_PCIE_V10_60_PCS_EQ_CONFIG1				0x0a0
+#define QPHY_PCIE_V10_60_PCS_G3_RXEQEVAL_TIME			0x0f0
+#define QPHY_PCIE_V10_60_PCS_G4_RXEQEVAL_TIME			0x0f4
+#define QPHY_PCIE_V10_60_PCS_G4_EQ_CONFIG5			0x108
+#define QPHY_PCIE_V10_60_PCS_G4_PRE_GAIN			0x15c
+#define QPHY_PCIE_V10_60_PCS_RX_MARGINING_CONFIG1		0x17c
+#define QPHY_PCIE_V10_60_PCS_RX_MARGINING_CONFIG3		0x184
+#define QPHY_PCIE_V10_60_PCS_RX_MARGINING_CONFIG5		0x18c
+#define QPHY_PCIE_V10_60_PCS_G3_FOM_EQ_CONFIG5			0x1ac
+#define QPHY_PCIE_V10_60_PCS_G4_FOM_EQ_CONFIG5			0x1c0
+#define QPHY_PCIE_V10_60_PCS_POWER_STATE_CONFIG6		0x1d0
+
+#endif

-- 
2.34.1




More information about the linux-phy mailing list