[PATCH v5 0/5] phy: qcom: edp: Add DP/eDP switch for phys

[Vinod Koul]

On Mon, 27 Apr 2026 14:35:18 +0800, Yongxing Mou wrote:
> Currently the PHY selects the DP/eDP configuration tables in a fixed way,
> choosing the table when enable. This driver has known issues:
> 1. The selected table does not match the actual platform mode.
> 2. It cannot support both modes at the same time.
> 
> As discussed here[1], this series:
> 1. Cleans up duplicated and incorrect tables based on the HPG.
> 2. Fixes the LDO programming error in eDP mode.
> 3. Adds DP/eDP mode switching support.
> 
> [...]

Applied, thanks!

[1/5] phy: qcom: edp: Unify generic DP/eDP swing and pre-emphasis tables
      commit: fd672888cccd6b855154efe0ac78e7ce3e8ab088
[2/5] phy: qcom: edp: Add eDP/DP mode switch support
      commit: 3011c365a329cf2db6d55e8d684550dc88350436
[3/5] phy: qcom: edp: Add SC7280/SC8180X swing/pre-emphasis tables
      commit: 3d22594d6f842814b7718600486fe3ce9453abf0
[4/5] phy: qcom: edp: Fix AUX_CFG8 programming for DP mode
      commit: bf237a9fcbbf9d658522f7315ffc04bf2d49be42
[5/5] phy: qcom: edp: Add PHY-specific LDO config for eDP low vdiff
      commit: 519a228ee40d1be3453d1da339b4577c3785e333

Best regards,
-- 
~Vinod