[PATCH v2 1/1] arm64: dts: qcom: hamoa: Fix incomplete Root Port property migration

[Konrad Dybcio]

On 3/30/26 4:09 AM, Ziyue Zhang wrote:
> Historically, the Qualcomm PCIe controller node (Host bridge) described
> all Root Port properties, such as PHY, PERST#, and WAKE#. But to provide
> a more accurate hardware description and to support future multi-Root Port
> controllers, these properties were moved to the Root Port node in the
> devicetree bindings.

[...]


> --- a/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts
> @@ -1033,9 +1033,6 @@ &mdss_dp3_phy {
>  };
>  
>  &pcie4 {
> -	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
> -	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
> -
>  	pinctrl-0 = <&pcie4_default>;
>  	pinctrl-names = "default";
>  
> @@ -1050,6 +1047,8 @@ &pcie4_phy {
>  };
>  
>  &pcie4_port0 {
> +	reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
> +	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
>  	wifi at 0 {
>  		compatible = "pci17cb,1107";

nit: This single hunk misses a \n before the subnode, but maybe Bjorn
could fix that up while applying?

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad