[PATCH v2 2/5] phy: qcom: qmp-pcie: Add multiple power-domains support

[Dmitry Baryshkov]

On Mon, Mar 23, 2026 at 12:15:29AM -0700, Qiang Yu wrote:
> The Glymur SoC's 3rd PCIe instance supports 8-lane mode using two PHYs in
> a bifurcated configuration. Each PHY has its own power domain (phy_gdsc)
> that must be powered on before initialization per hardware requirements.
> 
> Current PHY power management assumes a single power domain per PHY,
> preventing proper setup for this dual-PHY scenario. Add support for
> multiple power domains by using devm_pm_domain_attach_list() to attach
> power domains manually, while maintaining compatibility with single
> power domain PHYs.
> 
> Enable runtime PM to allow power domain control when the PCIe driver
> calls phy_power_on/phy_power_off:
> 
> - Single power domain: QMP PHY platform device directly attaches to
>   power domain and controls it during runtime resume/suspend
> - Multiple power domains: devm_pm_domain_attach_list() creates virtual
>   devices as power domain suppliers, linked to the QMP PHY platform
>   device as consumer
> 
> This ensures power domains are properly attached and turned on/off
> for both single and multiple power domain configurations.
> 
> Signed-off-by: Qiang Yu <qiang.yu at oss.qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>


-- 
With best wishes
Dmitry