[PATCH 1/6] phy: qcom-qmp: Add missing QSERDES COM v2 registers

[Shawn Guo]

A few registers that could be used by phy-qcom-qmp drivers are missing
from qserdes-com-v2 header.  Add them.

Signed-off-by: Shawn Guo <shengchao.guo at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v2.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v2.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v2.h
index 3ea1884f35dd..cb599c113189 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v2.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v2.h
@@ -34,6 +34,7 @@
 #define QSERDES_V2_COM_LOCK_CMP3_MODE1			0x060
 #define QSERDES_V2_COM_EP_CLOCK_DETECT_CTR		0x068
 #define QSERDES_V2_COM_SYSCLK_DET_COMP_STATUS		0x06c
+#define QSERDES_V2_COM_BG_TRIM				0x070
 #define QSERDES_V2_COM_CLK_EP_DIV			0x074
 #define QSERDES_V2_COM_CP_CTRL_MODE0			0x078
 #define QSERDES_V2_COM_CP_CTRL_MODE1			0x07c
@@ -47,6 +48,7 @@
 #define QSERDES_V2_COM_CML_SYSCLK_SEL			0x0b0
 #define QSERDES_V2_COM_RESETSM_CNTRL			0x0b4
 #define QSERDES_V2_COM_RESETSM_CNTRL2			0x0b8
+#define QSERDES_V2_COM_RESCODE_DIV_NUM			0x0c4
 #define QSERDES_V2_COM_LOCK_CMP_EN			0x0c8
 #define QSERDES_V2_COM_LOCK_CMP_CFG			0x0cc
 #define QSERDES_V2_COM_DEC_START_MODE0			0x0d0
@@ -83,6 +85,7 @@
 #define QSERDES_V2_COM_RESTRIM_CODE_STATUS		0x164
 #define QSERDES_V2_COM_PLLCAL_CODE1_STATUS		0x168
 #define QSERDES_V2_COM_PLLCAL_CODE2_STATUS		0x16c
+#define QSERDES_V2_COM_BG_CTRL				0x170
 #define QSERDES_V2_COM_CLK_SELECT			0x174
 #define QSERDES_V2_COM_HSCLK_SEL			0x178
 #define QSERDES_V2_COM_INTEGLOOP_BINCODE_STATUS		0x17c
-- 
2.43.0