[PATCH v2 net-next 1/5] net: phy: move mdio_device reset handling functions in the code

[Heiner Kallweit]

In preparation of a follow-up patch this moves reset-related functions
in the code.

Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
 drivers/net/phy/mdio_device.c | 162 +++++++++++++++++-----------------
 1 file changed, 81 insertions(+), 81 deletions(-)

diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index b8a5a183819..da4fb7484c7 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -24,6 +24,87 @@
 #include <linux/property.h>
 #include "mdio-private.h"
 
+/**
+ * mdio_device_register_reset - Read and initialize the reset properties of
+ *				an mdio device
+ * @mdiodev: mdio_device structure
+ *
+ * Return: Zero if successful, negative error code on failure
+ */
+int mdio_device_register_reset(struct mdio_device *mdiodev)
+{
+	struct reset_control *reset;
+
+	/* Deassert the optional reset signal */
+	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
+						 "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(mdiodev->reset_gpio))
+		return PTR_ERR(mdiodev->reset_gpio);
+
+	if (mdiodev->reset_gpio)
+		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
+
+	reset = reset_control_get_optional_exclusive(&mdiodev->dev, "phy");
+	if (IS_ERR(reset)) {
+		gpiod_put(mdiodev->reset_gpio);
+		mdiodev->reset_gpio = NULL;
+		return PTR_ERR(reset);
+	}
+
+	mdiodev->reset_ctrl = reset;
+
+	/* Read optional firmware properties */
+	device_property_read_u32(&mdiodev->dev, "reset-assert-us",
+				 &mdiodev->reset_assert_delay);
+	device_property_read_u32(&mdiodev->dev, "reset-deassert-us",
+				 &mdiodev->reset_deassert_delay);
+
+	return 0;
+}
+
+/**
+ * mdio_device_unregister_reset - uninitialize the reset properties of
+ *				  an mdio device
+ * @mdiodev: mdio_device structure
+ */
+void mdio_device_unregister_reset(struct mdio_device *mdiodev)
+{
+	gpiod_put(mdiodev->reset_gpio);
+	mdiodev->reset_gpio = NULL;
+	reset_control_put(mdiodev->reset_ctrl);
+	mdiodev->reset_ctrl = NULL;
+	mdiodev->reset_assert_delay = 0;
+	mdiodev->reset_deassert_delay = 0;
+}
+
+void mdio_device_reset(struct mdio_device *mdiodev, int value)
+{
+	unsigned int d;
+
+	if (!mdiodev->reset_gpio && !mdiodev->reset_ctrl)
+		return;
+
+	if (mdiodev->reset_state == value)
+		return;
+
+	if (mdiodev->reset_gpio)
+		gpiod_set_value_cansleep(mdiodev->reset_gpio, value);
+
+	if (mdiodev->reset_ctrl) {
+		if (value)
+			reset_control_assert(mdiodev->reset_ctrl);
+		else
+			reset_control_deassert(mdiodev->reset_ctrl);
+	}
+
+	d = value ? mdiodev->reset_assert_delay : mdiodev->reset_deassert_delay;
+	if (d)
+		fsleep(d);
+
+	mdiodev->reset_state = value;
+}
+EXPORT_SYMBOL(mdio_device_reset);
+
 void mdio_device_free(struct mdio_device *mdiodev)
 {
 	put_device(&mdiodev->dev);
@@ -108,87 +189,6 @@ void mdio_device_remove(struct mdio_device *mdiodev)
 }
 EXPORT_SYMBOL(mdio_device_remove);
 
-/**
- * mdio_device_register_reset - Read and initialize the reset properties of
- *				an mdio device
- * @mdiodev: mdio_device structure
- *
- * Return: Zero if successful, negative error code on failure
- */
-int mdio_device_register_reset(struct mdio_device *mdiodev)
-{
-	struct reset_control *reset;
-
-	/* Deassert the optional reset signal */
-	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
-						 "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(mdiodev->reset_gpio))
-		return PTR_ERR(mdiodev->reset_gpio);
-
-	if (mdiodev->reset_gpio)
-		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
-
-	reset = reset_control_get_optional_exclusive(&mdiodev->dev, "phy");
-	if (IS_ERR(reset)) {
-		gpiod_put(mdiodev->reset_gpio);
-		mdiodev->reset_gpio = NULL;
-		return PTR_ERR(reset);
-	}
-
-	mdiodev->reset_ctrl = reset;
-
-	/* Read optional firmware properties */
-	device_property_read_u32(&mdiodev->dev, "reset-assert-us",
-				 &mdiodev->reset_assert_delay);
-	device_property_read_u32(&mdiodev->dev, "reset-deassert-us",
-				 &mdiodev->reset_deassert_delay);
-
-	return 0;
-}
-
-/**
- * mdio_device_unregister_reset - uninitialize the reset properties of
- *				  an mdio device
- * @mdiodev: mdio_device structure
- */
-void mdio_device_unregister_reset(struct mdio_device *mdiodev)
-{
-	gpiod_put(mdiodev->reset_gpio);
-	mdiodev->reset_gpio = NULL;
-	reset_control_put(mdiodev->reset_ctrl);
-	mdiodev->reset_ctrl = NULL;
-	mdiodev->reset_assert_delay = 0;
-	mdiodev->reset_deassert_delay = 0;
-}
-
-void mdio_device_reset(struct mdio_device *mdiodev, int value)
-{
-	unsigned int d;
-
-	if (!mdiodev->reset_gpio && !mdiodev->reset_ctrl)
-		return;
-
-	if (mdiodev->reset_state == value)
-		return;
-
-	if (mdiodev->reset_gpio)
-		gpiod_set_value_cansleep(mdiodev->reset_gpio, value);
-
-	if (mdiodev->reset_ctrl) {
-		if (value)
-			reset_control_assert(mdiodev->reset_ctrl);
-		else
-			reset_control_deassert(mdiodev->reset_ctrl);
-	}
-
-	d = value ? mdiodev->reset_assert_delay : mdiodev->reset_deassert_delay;
-	if (d)
-		fsleep(d);
-
-	mdiodev->reset_state = value;
-}
-EXPORT_SYMBOL(mdio_device_reset);
-
 /**
  * mdio_probe - probe an MDIO device
  * @dev: device to probe
-- 
2.53.0