[PATCH v6 18/23] phy: rockchip: usbdp: Re-init the PHY on orientation change

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Missing Hardware Initialization
--

commit 2a50b346fcf7d166779e0cb198d3572f5bdd300c
Author: Sebastian Reichel <sebastian.reichel at collabora.com>

phy: rockchip: usbdp: Re-init the PHY on orientation change

This commit updates the cable orientation configuration to re-initialize
the PHY when the orientation changes. It sets a flag to trigger the
re-initialization to prevent DisplayPort functionality from breaking on
reverse cable plugs.

> diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
> index c210aaeb283a5..402f3cafcf0ae 100644
> --- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
> +++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c

[ ... ]

> @@ -622,6 +622,7 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
>  				 enum typec_orientation orien)
>  {
>  	struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
> +	bool flipped = orien == TYPEC_ORIENTATION_REVERSE;
>  
>  	mutex_lock(&udphy->mutex);
>  
> @@ -633,7 +634,10 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
>  		goto unlock_ret;
>  	}
>  
> -	udphy->flip = orien == TYPEC_ORIENTATION_REVERSE;
> +	if (udphy->flip != flipped)
> +		udphy->phy_needs_reinit = true;

[Severity: High]
This is a pre-existing issue, but does setting udphy->phy_needs_reinit = true
here actually trigger a hardware update for pure USB3 connections?

When a device is plugged in, the hardware lane muxing is typically updated
inside rk_udphy_init(), which is called conditionally by rk_udphy_power_on().

However, looking at the phy_ops struct for USB3:

static const struct phy_ops rk_udphy_usb3_phy_ops = {
	.init		= rk_udphy_usb3_phy_init,
	.exit		= rk_udphy_usb3_phy_exit,
	.owner		= THIS_MODULE,
};

Because rk_udphy_usb3_phy_ops omits the .power_on callback, and the DWC3
controller only calls .init once during probe, the USB subsystem won't
trigger the PHY re-initialization required to apply the orientation changes.

Will the phy_needs_reinit flag remain set indefinitely, causing pure USB3
devices to fail to link at SuperSpeed if plugged in the reverse orientation?

> +
> +	udphy->flip = flipped;
>  	rk_udphy_set_typec_default_mapping(udphy);
>  	rk_udphy_usb_bvalid_enable(udphy, true);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260619-rockchip-usbdp-cleanup-v6-0-3bb1f54b3f35@collabora.com?part=18