[PATCH v2 00/10] Add RZ/G3L USB2.0 host support

[Biju]

From: Biju Das <biju.das.jz at bp.renesas.com>

Add device tree binding support for the RZ/G3L (r9a08g046) USB PHY
controller. The RZ/G3L USB PHY block is similar to RZ/G3S, but each port
has an OTG controller, unlike RZ/G3S, which has an OTG controller only on
port 1.

v1->v2:
 * Dropped patch#6(Introduce helper for regulator registration)
 * Passing pointer to an array of regulators to make it scalable.
 * Dropped regulator1-vbus and added a regulators group node.
 * Updated commit description for patch#1,#4,#6,#7,#8,#9 and #10.
 * Added enum instead of const in the compatible section.
 * Updated schema check.
 * Collected tag for PHY binding patch.
   in the regulator driver.
 * Added regulators group node and its children in SoC dtsi.

Biju Das (10):
  dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3L support
  dt-bindings: phy: renesas,usb2-phy: Document RZ/G3L PHY bindings
  clk: renesas: r9a08g046: Add USB2.0 clock and reset entries
  reset: rzg2l-usbphy-ctrl: Introduce info struct for match data
  reset: rzg2l-usbphy-ctrl: Add RZ/G3L support
  regulator: renesas-usb-vbus-regulator: Add RZ/G3L VBUS regulator
    support
  phy: renesas: phy-rcar-gen3-usb2: Add RZ/G3L support
  phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for
    disabled VBUS regulator
  arm64: dts: renesas: r9a08g046: Add USB2.0 device nodes
  arm64: dts: renesas: r9a08g046l48-smarc: Add USB2.0 support

 .../bindings/phy/renesas,usb2-phy.yaml        |   2 +
 .../reset/renesas,rzg2l-usbphy-ctrl.yaml      |  49 +++++++-
 arch/arm64/boot/dts/renesas/r9a08g046.dtsi    | 105 ++++++++++++++++++
 .../boot/dts/renesas/r9a08g046l48-smarc.dts   |  49 ++++++++
 drivers/clk/renesas/r9a08g046-cpg.c           |  15 +++
 drivers/phy/renesas/phy-rcar-gen3-usb2.c      |  20 ++--
 .../regulator/renesas-usb-vbus-regulator.c    |  53 +++++++++
 drivers/reset/reset-rzg2l-usbphy-ctrl.c       |  44 +++++---
 8 files changed, 312 insertions(+), 25 deletions(-)

-- 
2.43.0