[PATCH 2/4] phy: qcom-qusb2: Fix SM6115 init sequence

[Iskren Chernev]

On 6/10/26 3:04 PM, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
> 
> I don't know where the existing one came from, but it's apparently
> wrong, according to both docs and a downstream DT [1]. Fix it up.

They came from DTB extracted from a running billie2 (OnePlus Nord N100):
[1] 
https://mainlining.dev/wp-content/uploads/2021/02/03_dtbdump_Qualcomm_Technologies_Inc._Bengal_SoC.dts 


The phone was bough early after launch, so it could have been 
wrong/updated later.

> The updated values also happen to match SM6125, which will allow us
> to fix that platform too.
> 
> [1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/bengal-usb.dtsi#145
> Fixes: 7756f1d6369e ("phy: qcom-qusb2: Add configuration for SM4250 and SM6115")
> Signed-off-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
> ---
>   drivers/phy/qualcomm/phy-qcom-qusb2.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index eb93015be841..c304ccd9f31f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -233,9 +233,9 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
>   
>   static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
>   	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
> -	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
>   	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
> -	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
> +	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc0),
>   
>   	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
>   	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
>