[PATCH v5 2/5] arm64: dts: qcom: Introduce Shikra SoC base dtsi

[Komal Bajaj]

On 6/12/2026 1:46 AM, Dmitry Baryshkov wrote:
> On Thu, Jun 11, 2026 at 03:40:09PM +0530, Komal Bajaj wrote:
>> Add initial device tree support for the Qualcomm Shikra SoC,
>> an IoT-focused platform built around a heterogeneous CPU cluster
>> (Cortex-A55 + Cortex-A78C) with RPM-based power and clock management.
>>
>> Enable support for the following peripherals:
>>    - CPU nodes
>>    - Global Clock Controller (GCC)
>>    - RPM-based clock controller (RPMCC) and power domains (RPMPD)
>>    - Interrupt controller
>>    - Top Level Mode Multiplexer (TLMM)
>>    - Debug UART
>>    - eMMC host controller
>>    - System timer and watchdog
>>
>> Co-developed-by: Imran Shaik <imran.shaik at oss.qualcomm.com>
>> Signed-off-by: Imran Shaik <imran.shaik at oss.qualcomm.com>
>> Co-developed-by: Monish Chunara <quic_mchunara at quicinc.com>
>> Signed-off-by: Monish Chunara <quic_mchunara at quicinc.com>
>> Co-developed-by: Rakesh Kota <rakesh.kota at oss.qualcomm.com>
>> Signed-off-by: Rakesh Kota <rakesh.kota at oss.qualcomm.com>
>> Co-developed-by: Raviteja Laggyshetty <raviteja.laggyshetty at oss.qualcomm.com>
>> Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty at oss.qualcomm.com>
>> Co-developed-by: Sneh Mankad <sneh.mankad at oss.qualcomm.com>
>> Signed-off-by: Sneh Mankad <sneh.mankad at oss.qualcomm.com>
>> Co-developed-by: Vishnu Santhosh <vishnu.santhosh at oss.qualcomm.com>
>> Signed-off-by: Vishnu Santhosh <vishnu.santhosh at oss.qualcomm.com>
>> Co-developed-by: Xueyao An <xueyao.an at oss.qualcomm.com>
>> Signed-off-by: Xueyao An <xueyao.an at oss.qualcomm.com>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
>> Signed-off-by: Komal Bajaj <komal.bajaj at oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/shikra.dtsi | 842 +++++++++++++++++++++++++++++++++++
>>   1 file changed, 842 insertions(+)
>>
>> +
>> +		rpm_msg_ram: sram at 45f0000 {
>> +			compatible = "qcom,rpm-msg-ram", "mmio-sram";
>> +			reg = <0x0 0x045f0000 0x0 0x7000>;
>> +
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			ranges = <0 0x0 0x045f0000 0x7000>;
> 0x0

ACK

>
>> +
>> +			apss_mpm: sram at 1b8 {
>> +				reg = <0x1b8 0x48>;
>> +			};
>> +		};
>> +
>> +		sram at 4690000 {
>> +			compatible = "qcom,rpm-stats";
>> +			reg = <0x0 0x04690000 0x0 0x14000>;
>> +		};
>> +
>> +		sdhc_1: mmc at 4744000 {
>> +			compatible = "qcom,shikra-sdhci", "qcom,sdhci-msm-v5";
>> +
>> +			reg = <0x0 0x04744000 0x0 0x1000>,
>> +			      <0x0 0x04745000 0x0 0x1000>;
>> +			reg-names = "hc",
>> +				    "cqhci";
>> +
>> +			iommus = <&apps_smmu 0xc0 0x0>;
>> +
>> +			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>,
>> +				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH 0>;
>> +			interrupt-names = "hc_irq",
>> +					  "pwr_irq";
>> +
>> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> +				 <&gcc GCC_SDCC1_APPS_CLK>,
>> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> +			clock-names = "iface",
>> +				      "core",
>> +				      "xo";
>> +
>> +			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
>> +					&mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
> Please align on '&'.

ACK

Thanks
Komal

>
>> +					<&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
>> +					&config_noc SLAVE_SDCC_1 RPM_ACTIVE_TAG>;
>> +			interconnect-names = "sdhc-ddr",
>> +					     "cpu-sdhc";
>> +