[PATCH 2/2] phy: qcom: qmp-pcie: Add IPQ9650 PCIe PHY support
Kathiravan Thirumoorthy
kathiravan.thirumoorthy at oss.qualcomm.com
Fri Jun 12 00:52:44 PDT 2026
On 6/12/2026 12:54 PM, Dmitry Baryshkov wrote:
> On Fri, Jun 12, 2026 at 12:13:04PM +0530, Kathiravan Thirumoorthy wrote:
>> On 6/12/2026 11:44 AM, Dmitry Baryshkov wrote:
>>> On Fri, Jun 12, 2026 at 08:22:02AM +0530, Kathiravan Thirumoorthy wrote:
>>>> On 6/12/2026 1:52 AM, Dmitry Baryshkov wrote:
>>>>> On Tue, Jun 09, 2026 at 03:46:56PM +0530, Kathiravan Thirumoorthy wrote:
>>>>>> On 6/8/2026 12:26 PM, Dmitry Baryshkov wrote:
>>>>>>> On Tue, Jun 02, 2026 at 02:40:18PM +0530, Kathiravan Thirumoorthy wrote:
>>>>>>>> The IPQ9650 platform has three Gen3 2-lane PCIe controllers and two Gen3
>>>>>>>> 1-lane PCIe controllers. The PHY instances also require the on-chip refgen
>>>>>>>> supply.
>>>>>>>>
>>>>>>>> Add the IPQ9650 Gen3 x1 and x2 QMP PCIe PHY configurations, including the
>>>>>>>> refgen regulator supply.
>>>>>>>>
>>>>>>>> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy at oss.qualcomm.com>
>>>>>>>> ---
>>>>>>>> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 220 +++++++++++++++++++++++++++++++
>>>>>>>> 1 file changed, 220 insertions(+)
>>>>>>>>
>>>>>>>> @@ -3378,6 +3524,10 @@ static const char * const qmp_phy_vreg_l[] = {
>>>>>>>> "vdda-phy", "vdda-pll",
>>>>>>>> };
>>>>>>>> +static const char * const ipq9650_qmp_phy_vreg_l[] = {
>>>>>>>> + "refgen",
>>>>>>>> +};
>>>>>>> Now vdda-phy / vdda-pll supplies?
>>>>>> Cross checked with HW team again. Along with refgen, there is a on-chip LDO
>>>>>> which supplies fixed voltage to the PHYs. It is enabled upon system power on
>>>>>> and no SW intervention is required.
>>>>> What is it being powered by? MX? CX?
>>>> It is driven by CX.
>>> I assume that there is no CX collapse on IPQ9650? Is CX not scaling on
>>> this chip. Please provide some details on the commit message.
>> That's right. No CX collapse on IPQ9650. Let me rewrite the commit message
>> as below. Hope its okay.
>>
>> --
>>
>> Add support for the IPQ9650 platform, which includes three Gen3 x2 PCIe
>> controllers and two Gen3 x1 PCIe controllers. The PHY instances require the
>> on-chip refgen supply.
>>
>> Add the IPQ9650 Gen3 x1 and x2 QMP PCIe PHY configurations along with the
>> refgen regulator supply. Note that an on-chip LDO, driven by the SoC CX,
>> supplies the PHY voltages without requiring software control. Note that CX
>> power collapse is not supported on IPQ9650.
> ...neither CX power collapse nor rail scaling...
>
> LGTM.
Thanks much. Have sent V2. Please have a look.
>
>
More information about the linux-phy
mailing list