[PATCH 2/2] phy: qcom: qmp-pcie: Add IPQ9650 PCIe PHY support

[Kathiravan Thirumoorthy]

On 6/12/2026 1:52 AM, Dmitry Baryshkov wrote:
> On Tue, Jun 09, 2026 at 03:46:56PM +0530, Kathiravan Thirumoorthy wrote:
>> On 6/8/2026 12:26 PM, Dmitry Baryshkov wrote:
>>> On Tue, Jun 02, 2026 at 02:40:18PM +0530, Kathiravan Thirumoorthy wrote:
>>>> The IPQ9650 platform has three Gen3 2-lane PCIe controllers and two Gen3
>>>> 1-lane PCIe controllers. The PHY instances also require the on-chip refgen
>>>> supply.
>>>>
>>>> Add the IPQ9650 Gen3 x1 and x2 QMP PCIe PHY configurations, including the
>>>> refgen regulator supply.
>>>>
>>>> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy at oss.qualcomm.com>
>>>> ---
>>>>    drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 220 +++++++++++++++++++++++++++++++
>>>>    1 file changed, 220 insertions(+)
>>>>
>>>> @@ -3378,6 +3524,10 @@ static const char * const qmp_phy_vreg_l[] = {
>>>>    	"vdda-phy", "vdda-pll",
>>>>    };
>>>> +static const char * const ipq9650_qmp_phy_vreg_l[] = {
>>>> +	"refgen",
>>>> +};
>>> Now vdda-phy / vdda-pll supplies?
>> Cross checked with HW team again. Along with refgen, there is a on-chip LDO
>> which supplies fixed voltage to the PHYs. It is enabled upon system power on
>> and no SW intervention is required.
> What is it being powered by? MX? CX?

It is driven by CX.

>> regulator-fixed doesn't take the resource 'reg'. May be should I create
>> another regulator driver which accepts 'reg', something similar to the
>> qcom-refgen-regulator? Please advise.
> If it doesn't require control, there is no need for a separate driver or
> separate supply. For example, the refgen is being references only by
> those devices which require software votes.

Thanks. Then let me respin this series on top of phy-next so that Vinod 
can pick it up.

>
>>>> +
>>>>    static const char * const sm8550_qmp_phy_vreg_l[] = {
>>>>    	"vdda-phy", "vdda-pll", "vdda-qref",
>>>>    };