[PATCH 3/4] arm64: dts: qcom: msm8996: Add VDD_MX to QUSB2 PHYs

[Dmitry Baryshkov]

On Wed, Jun 10, 2026 at 02:04:16PM +0200, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
> 
> The QUSB2 PHYs are powered by (among others) the VDD_MX power rail.
> Describe that in the DT.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 2f67e665996f..b7cd1928335c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -3192,7 +3192,12 @@ hsusb_phy1: phy at 7411000 {
>  			clock-names = "cfg_ahb", "ref";
>  
>  			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +
> +			power-domains = <&rpmpd MSM8996_VDDMX>;
> +			required-opps = <&rpmpd_opp4>;

Interesting, might it be the reason for QUSB PLL locking issues which I
have been observing from time to time?

> +
>  			nvmem-cells = <&qusb2p_hstx_trim>;
> +
>  			status = "disabled";
>  		};
>  
> @@ -3206,7 +3211,12 @@ hsusb_phy2: phy at 7412000 {
>  			clock-names = "cfg_ahb", "ref";
>  
>  			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
> +
> +			power-domains = <&rpmpd MSM8996_VDDMX>;
> +			required-opps = <&rpmpd_opp4>;
> +
>  			nvmem-cells = <&qusb2s_hstx_trim>;
> +
>  			status = "disabled";
>  		};
>  
> 
> -- 
> 2.54.0
> 
> 
> -- 
> linux-phy mailing list
> linux-phy at lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy

-- 
With best wishes
Dmitry