[PATCH V1 0/2] arm64: dts: qcom: Shikra SD Card support

[Monish Chunara]

This series adds SD card support for the Shikra platform.

The first patch adds the SDHC2 controller node and the necessary pinctrl
configurations to the base Shikra SoC dtsi. The second patch enables 
this support on the Shikra EVK (CQS, CQM, and IQS variants) by defining
the regulator supplies and the card detection GPIO.

Testing:
- Validated on Shikra EVK variants.

This series depends on:
- https://lore.kernel.org/all/20260527-shikra-dt-v4-0-b5ca1fa0b392@oss.qualcomm.com/
- https://lore.kernel.org/all/20260521-shikra-rproc-v3-0-2fca0bbe1ad7@oss.qualcomm.com/
- https://lore.kernel.org/linux-devicetree/20260513-tsens_binding-v1-1-1780c6a6caf2@oss.qualcomm.com/
- https://lore.kernel.org/all/20260524-shikra_epss_l3-v1-0-b1528a436134@oss.qualcomm.com/
- https://lore.kernel.org/all/20260522-shikra-cpufreq-scaling-v4-0-f042a25896c5@oss.qualcomm.com/
- https://lore.kernel.org/all/20260530-shikra-dt-m1-v2-0-6bb581035d13@oss.qualcomm.com/

Monish Chunara (2):
  arm64: dts: qcom: Add SD Card support for Shikra SoC
  arm64: dts: qcom: Enable SD card for Shikra EVK

 arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 18 ++++
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 18 ++++
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 18 ++++
 arch/arm64/boot/dts/qcom/shikra.dtsi        | 93 +++++++++++++++++++++
 4 files changed, 147 insertions(+)

-- 
2.34.1