[PATCH v2 2/4] phy: freescale: fsl-samsung-hdmi: Resume device on remove

[Xu Yang]

On Tue, Jul 21, 2026 at 02:47:50PM +0800, Can Peng wrote:
> The APB clock is acquired with devm_clk_get_enabled(), so devres will
> disable and unprepare it when the driver is unbound.
> 
> Runtime suspend also disables the APB clock. If the device is runtime
> suspended when the driver is removed, devres will disable the already
> disabled clock and the clock enable count can underflow.
> 
> Resume the device in the remove callback before devres runs so the final
> devres disable is balanced. Drop the runtime PM reference with noidle so
> the device is not suspended again before devres cleanup.
> 
> Fixes: 6ad082bee902 ("phy: freescale: add Samsung HDMI PHY")
> Cc: stable at vger.kernel.org
> Signed-off-by: Can Peng <pengcan at kylinos.cn>
> ---
>  drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> index e7af4f9c7b20..5f41890bd134 100644
> --- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> @@ -690,7 +690,16 @@ static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
>  
>  static void fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
>  {
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(&pdev->dev);
> +	if (ret < 0)
> +		dev_warn(&pdev->dev, "failed to resume on remove: %d\n", ret);
> +
>  	of_clk_del_provider(pdev->dev.of_node);
> +
> +	if (!ret)
> +		pm_runtime_put_noidle(&pdev->dev);
>  }

The clk "apb" still may be disabled twice on removal for the same reason.
fsl_samsung_hdmi_phy_suspend() may be run after fsl_samsung_hdmi_phy_remove().

>  
>  static int __maybe_unused fsl_samsung_hdmi_phy_suspend(struct device *dev)
> -- 
> 2.53.0
>