[PATCH] phy: qcom: m31-eusb2: Fix return value of init call

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Hardware initialization failures during register configuration in `m31eusb2_phy_init` are ignored, leading to a silent failure.
--

--- Patch [1]: [PATCH] phy: qcom: m31-eusb2: Fix return value of init call ---
commit 65f666fe30cbc54b37ee682f3064a24fcc24b16f
Author: Krishna Kurapati <krishna.kurapati at oss.qualcomm.com>

phy: qcom: m31-eusb2: Fix return value of init call
    
The init call previously returned 0 even when repeater initialization or clock
enablement failed. This patch updates the failure path to return the actual
error value.

> diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
> index 0bec8657149c9..275df38256de3 100644
> --- a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
[ ... ]
>  	m31eusb2_phy_write_sequence(phy, data->setup_seq, data->setup_seq_nregs);
>  	m31eusb2_phy_write_readback(phy->base,
>  				    USB_PHY_HS_PHY_CTRL_COMMON0, FSEL,
>  				    FIELD_PREP(FSEL, data->fsel));
>  	m31eusb2_phy_write_sequence(phy, data->override_seq, data->override_seq_nregs);
>  	m31eusb2_phy_write_sequence(phy, data->reset_seq, data->reset_seq_nregs);
>  
>  	return 0;

[Severity: High]
This is a pre-existing issue, but since this patch fixes error handling in 
m31eusb2_phy_init(), should we also check the return values of these register 
configuration functions?

If m31eusb2_phy_write_sequence() or m31eusb2_phy_write_readback() fails, the 
error is currently ignored. The function successfully returns 0 without 
executing the disable_repeater and disable_vreg cleanup paths. This could leave 
the PHY hardware in an incorrectly initialized state.

>  
>  disable_repeater:
>  	phy_exit(phy->repeater);
>  disable_vreg:
>  	regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs);
>  
> -	return 0;
> +	return ret;
>  }

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260718-m31-eusb2-fix-v1-1-8588a1b94d76@oss.qualcomm.com?part=1