[PATCH v5 3/3] arm64: dts: qcom: glymur: Wire PCIe3a/3b to shared Gen5x8 PHY

[Konrad Dybcio]

On 7/17/26 11:58 AM, Qiang Yu wrote:
> Glymur's PCIe3a and PCIe3b controllers share a single Gen5x8 QMP PHY block
> that can be bifurcated into two independent x4 links, rather than each
> controller owning its own dedicated PHY.
> 
> Add a pcie3_phy node describing the shared PHY block, add the missing
> PCIe3a controller node, and point both PCIe3a's and PCIe3b's port phys
> at &pcie3_phy (index 0 and 1 respectively) so each controller picks up
> its half of the bifurcated PHY. Update the GCC pipe clock parent array
> to reference the new PHY's clock outputs instead of the placeholders.
> 
> Signed-off-by: Qiang Yu <qiang.yu at oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/glymur-crd.dtsi |   8 +
>  arch/arm64/boot/dts/qcom/glymur.dtsi     | 336 ++++++++++++++++++++++++++++++-

These changes really shouldn't be in the same commit

>  2 files changed, 342 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
> index c12808abbfe1..e8e81bf9a6a1 100644
> --- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
> +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
> @@ -750,6 +750,14 @@ &pcie3b {
>  	pinctrl-names = "default";
>  };
>  
> +&pcie3_phy {
> +	vdda-phy-supply = <&vreg_l3c_e1_0p89>;
> +	vdda-pll-supply = <&vreg_l2c_e1_1p14>;
> +
> +	vdda-refgen0p9-supply = <&vreg_l1c_e1_0p82>;
> +	vdda-refgen1p2-supply = <&vreg_l4f_e1_1p08>;
> +};

This node is disabled

Konrad