[PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8255P USB PHY

[Krzysztof Kozlowski]

On Thu, Jul 09, 2026 at 04:52:09PM +0200, Mattijs Korpershoek wrote:
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> index 01342823e57f..80b04b7f7584 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> @@ -26,6 +26,7 @@ properties:
>                - qcom,msm8996-qmp-usb3-phy
>                - qcom,qcs8300-qmp-usb3-uni-phy
>                - qcom,qdu1000-qmp-usb3-uni-phy
> +              - qcom,sa8255p-qmp-usb3-uni-phy
>                - qcom,sa8775p-qmp-usb3-uni-phy
>                - qcom,sc8180x-qmp-usb3-uni-phy
>                - qcom,sc8280xp-qmp-usb3-uni-phy
> @@ -54,7 +55,13 @@ properties:
>      maxItems: 5
>  
>    power-domains:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
> +
> +  power-domain-names:
> +    items:
> +      - const: usb_transfer
> +      - const: usb_core

usb_ feels redundant, since this is USB phy.

>  
>    resets:
>      maxItems: 2
> @@ -82,14 +89,6 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - clocks
> -  - clock-names
> -  - resets
> -  - reset-names
> -  - vdda-phy-supply
> -  - vdda-pll-supply
> -  - "#clock-cells"
> -  - clock-output-names
>    - "#phy-cells"

Just like in all other saXXXX cases, same review: move to a separate
binding file.

Best regards,
Krzysztof