[PATCH v5 3/4] phy: qcom-qusb2: Add support for Shikra

[Krishna Kurapati]

Add init sequence and phy configuration for Shikra. Since the init
sequence is same as that of QCS615, reuse the existing init table in
Shikra.

Signed-off-by: Krishna Kurapati <krishna.kurapati at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index b22b3c6adfd3..101c0820023d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -377,6 +377,17 @@ static const struct qusb2_phy_cfg sdm660_phy_cfg = {
 	.mask_core_ready = PLL_LOCKED,
 };
 
+static const struct qusb2_phy_cfg shikra_phy_cfg = {
+	.tbl            = qcs615_init_tbl,
+	.tbl_num        = ARRAY_SIZE(qcs615_init_tbl),
+	.regs           = msm8996_regs_layout,
+
+	.has_pll_test	= true,
+	.se_clk_scheme_default = true,
+	.disable_ctrl   = CLAMP_N_EN | FREEZIO_N | POWER_DOWN,
+	.mask_core_ready = PLL_LOCKED,
+};
+
 static const struct qusb2_phy_cfg sm6115_phy_cfg = {
 	.tbl		= sm6115_init_tbl,
 	.tbl_num	= ARRAY_SIZE(sm6115_init_tbl),
@@ -953,6 +964,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 	}, {
 		.compatible	= "qcom,sdm660-qusb2-phy",
 		.data		= &sdm660_phy_cfg,
+	}, {
+		.compatible	= "qcom,shikra-qusb2-phy",
+		.data		= &shikra_phy_cfg,
 	}, {
 		.compatible	= "qcom,sm4250-qusb2-phy",
 		.data		= &sm6115_phy_cfg,

-- 
2.34.1