[PATCH 01/12] dt-bindings: phy: Document MT8195 and MT8196 DisplayPort PHYs

[AngeloGioacchino Del Regno]

On 7/1/26 14:27, sashiko-bot at kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> - [Low] The device tree example will fail `make dt_binding_check` validation due to a 64-bit `reg` property at the root level without `#address-cells = <2>` and `#size-cells = <2>`.

That's not "Low", that should be "High" - failing dt_binding_check validation is
critical enough here.

Anyway, will allow some time for reviews before fixing that.

> --
> 
> commit c7b476cde050e045aaa56bae9dd7ecc7b3d34ced
> Author: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> dt-bindings: phy: Document MT8195 and MT8196 DisplayPort PHYs
> 
> This adds bindings for the DisplayPort and Embedded DisplayPort PHYs found in
> the MediaTek MT8195 and MT8196 SoCs. The PHY supports varying impedance
> calibrations for the signals to reach an optimal EYE signal pattern.
> 
>> diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8195-dp-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8195-dp-phy.yaml
>> new file mode 100644
>> index 0000000000000..5847963a7085e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8195-dp-phy.yaml
> 
> [ ... ]
> 
>> +examples:
>> +  - |
>> +    phy at 1c500000 {
>> +        compatible = "mediatek,mt8195-dp-phy";
>> +        reg = <0 0x1c500000 0 0x2000>;
> 
> [Severity: Low]
> Looking at the examples section in mediatek,mt8195-dp-phy.yaml, will this
> example pass make dt_binding_check validation? The reg property contains 4
> cells, but since the example node is at the root level without a parent node
> explicitly defining #address-cells = <2> and #size-cells = <2>, the dummy
> root node defaults to 1 for both. This causes the 4 cells to be parsed as 2
> separate items, which violates the schema's maxItems: 1 constraint.
> 
>> +        #phy-cells = <0>;
>> +        nvmem-cells = <&edp_glb_bias_trim>, <&edp_clktx_impsel>,
>> +                      <&edp_imp_ln0_pmos>, <&edp_imp_ln0_nmos>,
>> +                      <&edp_imp_ln1_pmos>, <&edp_imp_ln1_nmos>,
>> +                      <&edp_imp_ln2_pmos>, <&edp_imp_ln2_nmos>,
>> +                      <&edp_imp_ln3_pmos>, <&edp_imp_ln3_nmos>;
>> +        nvmem-cell-names = "rbias-trim", "impedance-txclk",
>> +                           "impedance-lane0p", "impedance-lane0n",
>> +                           "impedance-lane1p", "impedance-lane1n",
>> +                           "impedance-lane2p", "impedance-lane2n",
>> +                           "impedance-lane3p", "impedance-lane3n";
>> +    };
>