[PATCH v7 07/10] phy: qualcomm: eusb2-repeater: Migrate to devm_spmi_subdevice_alloc_and_add()

[AngeloGioacchino Del Regno]

Il 14/01/26 09:59, Andy Shevchenko ha scritto:
> On Wed, Jan 14, 2026 at 09:39:54AM +0100, AngeloGioacchino Del Regno wrote:
>> Some Qualcomm PMICs integrate an USB Repeater device, used to
>> convert between eUSB2 and USB 2.0 signaling levels, reachable
>> in a specific address range over SPMI.
>>
>> Instead of using the parent SPMI device (the main PMIC) as a kind
>> of syscon in this driver, register a new SPMI sub-device for EUSB2
>> and initialize its own regmap with this sub-device's specific base
>> address, retrieved from the devicetree.
>>
>> This allows to stop manually adding the register base address to
>> every R/W call in this driver, as this can be, and is now, handled
>> by the regmap API instead.
> 
> Same comments and actually one more.
> 
> ...
> 
>> +	struct regmap_config eusb2_regmap_config = {
>> +		.reg_bits = 16,
>> +		.val_bits = 8,
>> +		.max_register = 0x100,
>> +		.fast_io = true,
>> +	};
> 
> This is third time of the same. Make it part of SPMI core and export to
> the users. Or are they semantically different like different slices?
> In that case you can export it under generic name like
> 
> 	spmi_default_slice_regmap_config
> 

There are more complicated devices around that I didn't port to the new
spmi subdevices, and I really don't want to make a default for now.

At least some of those need different params (including some MediaTek ones
that are not upstream yet).

Can we please let this in and *then* see how much can be commonized after
the majority of more complicated drivers are migrated in the future?

Regards,
Angelo