[PATCH 2/5] phy: tegra: xusb: Fix USB2 port regulator disable logic
Diogo Ivo
diogo.ivo at tecnico.ulisboa.pt
Tue Jan 13 05:30:02 PST 2026
On 12/24/25 07:27, Vinod Koul wrote:
> On 04-12-25, 21:27, Diogo Ivo wrote:
>> The USB2 PHY mode handling on Tegra210 incorrectly relied on
>> regulator_is_enabled() when determining whether the VBUS supply should
>> be disabled during role changes. This is because regulator_is_enabled()
>> reports exactly what is states and not if there is an unbalanced number
>> of calls between regulator_enable() and regulator_disable(). For
>> example, regulator_is_enabled() always reports true on a fixed-regulator
>> with no enable gpio, which is the case on the Pixel C.
>>
>> This then leads to the PHY driver wrongfully calling regulator_disable()
>> when transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE since the driver
>> did not previously call the corresponding regulator_enable().
>>
>> Fix this by keeping track of the current role and updating the logic to
>> disable the regulator only when the previous role was USB_ROLE_HOST.
>>
>> While at it fix a small typo in a comment.
>
> Never mix a patch with something else please. More imp if it is fix
> which will go to rcX. Please send a different patch for typo
Ok, will split for v2.
>> Signed-off-by: Diogo Ivo <diogo.ivo at tecnico.ulisboa.pt>
>> ---
>> drivers/phy/tegra/xusb-tegra210.c | 5 +++--
>> drivers/phy/tegra/xusb.h | 1 +
>> 2 files changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
>> index 3409924498e9..63ad57d95514 100644
>> --- a/drivers/phy/tegra/xusb-tegra210.c
>> +++ b/drivers/phy/tegra/xusb-tegra210.c
>> @@ -1934,9 +1934,9 @@ static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>> /*
>> * When port is peripheral only or role transitions to
>> * USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
>> - * be enabled.
>> + * enabled.
>> */
>> - if (regulator_is_enabled(port->supply))
>> + if (port->role == USB_ROLE_HOST)
>> regulator_disable(port->supply);
>>
>> tegra210_xusb_padctl_id_override(padctl, false);
>> @@ -1944,6 +1944,7 @@ static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>> }
>> }
>>
>> + port->role = submode;
>> mutex_unlock(&padctl->lock);
>>
>> return err;
>> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
>> index d2b5f9565132..273af147dfd3 100644
>> --- a/drivers/phy/tegra/xusb.h
>> +++ b/drivers/phy/tegra/xusb.h
>> @@ -317,6 +317,7 @@ struct tegra_xusb_usb2_port {
>> enum usb_dr_mode mode;
>> bool internal;
>> int usb3_port_fake;
>> + enum usb_role role;
>> };
>
> Jonathan can we get some t-b for these two patches
>
More information about the linux-phy
mailing list