[PATCH 1/5] phy: qcom: qmp-pcie: Skip PHY reset if already up

[Abel Vesa]

On 26-01-09 12:51:06, Krishna Chaitanya Chundru wrote:
> If the bootloader has already powered up the PCIe PHY, doing a full
> reset and waiting for it to come up again slows down boot time.
> 
> Add a check for PHY status and skip the reset steps when the PHY is
> already active. In this case, only enable the required resources during
> power-on. This works alongside the existing logic that skips the init
> sequence.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru at oss.qualcomm.com>

Reviewed-by: Abel Vesa <abel.vesa at oss.qualcomm.com>