[PATCH] phy: qcom: edp: Fix NULL pointer dereference for phy v6 (x1e80100)

[Val Packett]

For Glymur SoC support, the com_clk_fwd_cfg callback was added, and a
stub implementation was added for the v4 of the hardware. However it
was omitted for the v6, causing a NULL pointer dereference oops on
Hamoa/Purwa (X1E/X1P) SoC devices. Fix by adding the appropriate stub.

Fixes: add66a6673bc ("phy: qcom: edp: Add Glymur platform support")
Signed-off-by: Val Packett <val at packett.cool>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 13feab99feec..a17492db21d8 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -613,6 +613,11 @@ static int qcom_edp_phy_com_resetsm_cntrl_v6(const struct qcom_edp *edp)
 				     val, val & BIT(0), 500, 10000);
 }
 
+static int qcom_edp_com_clk_fwd_cfg_v6(const struct qcom_edp *edp)
+{
+	return 0;
+}
+
 static int qcom_edp_com_bias_en_clkbuflr_v6(const struct qcom_edp *edp)
 {
 	/* Turn on BIAS current for PHY/PLL */
@@ -758,6 +763,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
 	.com_power_on		= qcom_edp_phy_power_on_v6,
 	.com_resetsm_cntrl	= qcom_edp_phy_com_resetsm_cntrl_v6,
 	.com_bias_en_clkbuflr	= qcom_edp_com_bias_en_clkbuflr_v6,
+	.com_clk_fwd_cfg	= qcom_edp_com_clk_fwd_cfg_v6,
 	.com_configure_pll	= qcom_edp_com_configure_pll_v6,
 	.com_configure_ssc	= qcom_edp_com_configure_ssc_v6,
 };
-- 
2.51.2