[PATCH v2 2/2] dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
Charan Pedumuru
charan.pedumuru at gmail.com
Wed Jan 7 08:11:16 PST 2026
Convert TI OMAP Control PHY binding to DT schema.
Changes during conversion:
- Define a new pattern 'control-phy' to match nodes defined in DT.
Signed-off-by: Charan Pedumuru <charan.pedumuru at gmail.com>
---
.../bindings/phy/ti,control-phy-otghs.yaml | 94 +++++++++++++++++++++
Documentation/devicetree/bindings/phy/ti-phy.txt | 98 ----------------------
2 files changed, 94 insertions(+), 98 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/ti,control-phy-otghs.yaml b/Documentation/devicetree/bindings/phy/ti,control-phy-otghs.yaml
new file mode 100644
index 000000000000..2c91609cac35
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,control-phy-otghs.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,control-phy-otghs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP Control PHY Module
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon at ti.com>
+
+description:
+ The TI OMAP Control PHY module is a hardware block within the system
+ control module (SCM) of Texas Instruments OMAP SoCs. It provides
+ centralized control over power, configuration, and auxiliary features
+ for multiple on-chip PHYs. This module is essential for proper PHY
+ operation in power-constrained embedded systems.
+
+properties:
+ $nodename:
+ pattern: "^control-phy(@[0-9a-f]+)?$"
+
+ compatible:
+ enum:
+ - ti,control-phy-otghs
+ - ti,control-phy-usb2
+ - ti,control-phy-pipe3
+ - ti,control-phy-pcie
+ - ti,control-phy-usb2-dra7
+ - ti,control-phy-usb2-am437
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [otghs_control, power, pcie_pcs, control_sma]
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,control-phy-otghs
+ then:
+ properties:
+ reg-names:
+ const: otghs_control
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,control-phy-pcie
+ then:
+ properties:
+ reg-names:
+ items:
+ - enum: [power, pcie_pcs, control_sma]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,control-phy-usb2
+ - ti,control-phy-usb2-dra7
+ - ti,control-phy-usb2-am437
+ - ti,control-phy-pipe3
+ then:
+ properties:
+ reg-names:
+ const: power
+
+required:
+ - reg
+ - compatible
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ control-phy at 4a00233c {
+ compatible = "ti,control-phy-otghs";
+ reg = <0x4a00233c 0x4>;
+ reg-names = "otghs_control";
+ };
+...
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
deleted file mode 100644
index 7c7936b89f2c..000000000000
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs
-
-OMAP CONTROL PHY
-
-Required properties:
- - compatible: Should be one of
- "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
- "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
- e.g. USB2_PHY on OMAP5.
- "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
- e.g. USB3 PHY and SATA PHY on OMAP5.
- "ti,control-phy-pcie" - for pcie to support external clock for pcie and to
- set PCS delay value.
- e.g. PCIE PHY in DRA7x
- "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
- DRA7 platform.
- "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
- AM437 platform.
- - reg : register ranges as listed in the reg-names property
- - reg-names: "otghs_control" for control-phy-otghs
- "power", "pcie_pcs" and "control_sma" for control-phy-pcie
- "power" for all other types
-
-omap_control_usb: omap-control-usb at 4a002300 {
- compatible = "ti,control-phy-otghs";
- reg = <0x4a00233c 0x4>;
- reg-names = "otghs_control";
-};
-
-TI PIPE3 PHY
-
-Required properties:
- - compatible: Should be "ti,phy-usb3", "ti,phy-pipe3-sata" or
- "ti,phy-pipe3-pcie. "ti,omap-usb3" is deprecated.
- - reg : Address and length of the register set for the device.
- - reg-names: The names of the register addresses corresponding to the registers
- filled in "reg".
- - #phy-cells: determine the number of cells that should be given in the
- phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
- clock-names.
- - clock-names: should include:
- * "wkupclk" - wakeup clock.
- * "sysclk" - system clock.
- * "refclk" - reference clock.
- * "dpll_ref" - external dpll ref clk
- * "dpll_ref_m2" - external dpll ref clk
- * "phy-div" - divider for apll
- * "div-clk" - apll clock
-
-Optional properties:
- - id: If there are multiple instance of the same type, in order to
- differentiate between each instance "id" can be used (e.g., multi-lane PCIe
- PHY). If "id" is not provided, it is set to default value of '1'.
- - syscon-pllreset: Handle to system control region that contains the
- CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
- register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
- - syscon-pcs : phandle/offset pair. Phandle to the system control module and the
- register offset to write the PCS delay value.
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
- the PHY.
-
-Recommended properties:
- - syscon-phy-power : phandle/offset pair. Phandle to the system control
- module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb3phy at 4a084400 {
- compatible = "ti,phy-usb3";
- reg = <0x4a084400 0x80>,
- <0x4a084800 0x64>,
- <0x4a084c00 0x40>;
- reg-names = "phy_rx", "phy_tx", "pll_ctrl";
- ctrl-module = <&omap_control_usb>;
- #phy-cells = <0>;
- clocks = <&usb_phy_cm_clk32k>,
- <&sys_clkin>,
- <&usb_otg_ss_refclk960m>;
- clock-names = "wkupclk",
- "sysclk",
- "refclk";
-};
-
-sata_phy: phy at 4a096000 {
- compatible = "ti,phy-pipe3-sata";
- reg = <0x4A096000 0x80>, /* phy_rx */
- <0x4A096400 0x64>, /* phy_tx */
- <0x4A096800 0x40>; /* pll_ctrl */
- reg-names = "phy_rx", "phy_tx", "pll_ctrl";
- ctrl-module = <&omap_control_sata>;
- clocks = <&sys_clkin1>, <&sata_ref_clk>;
- clock-names = "sysclk", "refclk";
- syscon-pllreset = <&scm_conf 0x3fc>;
- #phy-cells = <0>;
-};
--
2.52.0
More information about the linux-phy
mailing list