[PATCH 6/6] arm64: dts: qcom: milos-fairphone-fp6: Enable UFS

[Konrad Dybcio]

On 1/7/26 9:05 AM, Luca Weiss wrote:
> Configure and enable the nodes for UFS, so that we can access the
> internal storage.
> 
> Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> index 3a7f2f2b3a59..7629ceddde2a 100644
> --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> @@ -819,6 +819,24 @@ &uart5 {
>  	status = "okay";
>  };
>  
> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l12b>;
> +	vcc-max-microamp = <800000>;
> +	vccq-supply = <&vreg_l5f>;
> +	vccq-max-microamp = <750000>;

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad