[PATCH 5/6] arm64: dts: qcom: milos: Add UFS nodes

Luca Weiss luca.weiss at fairphone.com
Wed Jan 7 00:05:55 PST 2026


Add the nodes for the UFS PHY and UFS host controller, along with the
ICE used for UFS.

Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
---
 arch/arm64/boot/dts/qcom/milos.dtsi | 127 +++++++++++++++++++++++++++++++++++-
 1 file changed, 124 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi
index e1a51d43943f..0f69deabb60c 100644
--- a/arch/arm64/boot/dts/qcom/milos.dtsi
+++ b/arch/arm64/boot/dts/qcom/milos.dtsi
@@ -797,9 +797,9 @@ gcc: clock-controller at 100000 {
 				 <&sleep_clk>,
 				 <0>, /* pcie_0_pipe_clk */
 				 <0>, /* pcie_1_pipe_clk */
-				 <0>, /* ufs_phy_rx_symbol_0_clk */
-				 <0>, /* ufs_phy_rx_symbol_1_clk */
-				 <0>, /* ufs_phy_tx_symbol_0_clk */
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <0>; /* usb3_phy_wrapper_gcc_usb30_pipe_clk */
 
 			#clock-cells = <1>;
@@ -1151,6 +1151,127 @@ aggre2_noc: interconnect at 1700000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		ufs_mem_phy: phy at 1d80000 {
+			compatible = "qcom,milos-qmp-ufs-phy";
+			reg = <0x0 0x01d80000 0x0 0x2000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsr TCSR_UFS_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc at 1d84000 {
+			compatible = "qcom,milos-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_cfg SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			operating-points-v2 = <&ufs_opp_table>;
+
+			iommus = <&apps_smmu 0x60 0>;
+
+			lanes-per-direction = <2>;
+			qcom,ice = <&ice>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		ice: crypto at 1d88000 {
+			compatible = "qcom,milos-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		tcsr_mutex: hwlock at 1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x20000>;

-- 
2.52.0




More information about the linux-phy mailing list