[PATCH 0/6] Enable UFS support on Milos

[Luca Weiss]

Add inline-crypto-engine and UFS bindings & driver parts, then add them
to milos dtsi and enable the UFS storage on Fairphone (Gen. 6).

Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
---
Luca Weiss (6):
      dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
      scsi: ufs: qcom,sc7180-ufshc: dt-bindings: Document the Milos UFS Controller
      dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Milos QMP UFS PHY
      phy: qcom-qmp-ufs: Add Milos support
      arm64: dts: qcom: milos: Add UFS nodes
      arm64: dts: qcom: milos-fairphone-fp6: Enable UFS

 .../bindings/crypto/qcom,inline-crypto-engine.yaml |   1 +
 .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml    |   2 +
 .../devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml |   2 +
 arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts   |  18 +++
 arch/arm64/boot/dts/qcom/milos.dtsi                | 127 ++++++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c            |  96 ++++++++++++++++
 6 files changed, 243 insertions(+), 3 deletions(-)
---
base-commit: ef1c7b875741bef0ff37ae8ab8a9aaf407dc141c
change-id: 20260106-milos-ufs-7bfbd774ca7c

Best regards,
-- 
Luca Weiss <luca.weiss at fairphone.com>