[PATCH v10 8/9] mux: add prompt and help text to CONFIG_MULTIPLEXER making it visible

[Geert Uytterhoeven]

Hi Josua,

On Wed, 25 Feb 2026 at 12:35, Josua Mayer <josua at solid-run.com> wrote:
> The multiplexer subsystem was initially designed only for use by drivers
> that require muxes, and did in particular not consider optional muxes or
> to compile as a module.
>
> Over time several drivers have added a "select MULTIPLEXER" dependency,
> some of which require a mux and some consider it optional. v7.0-rc1
> shows 15 such occurrences in Kconfig files, in a variety of subsystems.
>
> Further some drivers such as gpio-mux are useful on their own (e.g.
> through device-tree idle-state property), but can not currently be
> selected through menuconfig unless another driver selecting MULTIPLEXER
> symbol was enabled first.
>
> The natural step forward to allow enabling mux core and drivers would be
> adding prompt and help text to the existing symbol.
>
> This violates the general kbuild advice to avoid selecting visible
> symbols.
>
> Alternatively addition of a wrapper symbol MUX_CORE was considered,
> which in turn would "select MULTIPLEXER". This however creates new
> issues and confusion as MULTIPLEXER and MUX_CORE need to share the same
> state, i.e. MUX_CORE in menuconfig must not be set to m while
> MULTIPLEXER was selected builtin. Further confusion occurs with Kconfig
> "depends on" relationships that could reference either MUX_CORE or
> MULTIPLEXER.
>
> It is common across the tree for subsystem symbols to be both visible
> and selected, e.g. I2C & SPI. In the same spirit multiplexer needs to
> ignore this particular kbuild rule.
>
> Add prompt and help text to the existing MULTIPLEXER symbol, making it
> visible in (menu)config without breaking existing "select MULTIPLEXER"
> occurrences in the tree.
>
> Select it by default when COMPILE_TEST is set for better coverage.
>
> Signed-off-by: Josua Mayer <josua at solid-run.com>

Thanks for your patch!

> --- a/drivers/mux/Kconfig
> +++ b/drivers/mux/Kconfig
> @@ -4,7 +4,14 @@
>  #
>
>  config MULTIPLEXER
> -       tristate
> +       tristate "Generic Multiplexer Support"
> +       default m if COMPILE_TEST

Please drop this line.  Merely enabling COMPILE_TEST should not
enable extra functionality.

> +       help
> +         This framework is designed to abstract multiplexer handling for
> +         devices via various GPIO-, MMIO/Regmap or specific multiplexer
> +         controller chips.
> +
> +         If unsure, say no.
>
>  menu "Multiplexer drivers"
>         depends on MULTIPLEXER

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds