[PATCH v1 1/4] phy: phy-can-transceiver: Convert to use device property API

[Vladimir Oltean]

Hi Andy,

On Thu, Feb 19, 2026 at 09:26:19PM +0100, Andy Shevchenko wrote:
> It seems the driver is half-moved to use device property APIs.
> Finish that by converting everything to use that.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> ---
>  drivers/phy/phy-can-transceiver.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
> index 330356706ad7..f2259af4af8a 100644
> --- a/drivers/phy/phy-can-transceiver.c
> +++ b/drivers/phy/phy-can-transceiver.c
> @@ -5,9 +5,9 @@
>   * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com
>   *
>   */
> -#include <linux/of.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/property.h>
>  #include <linux/module.h>
>  #include <linux/gpio.h>
>  #include <linux/gpio/consumer.h>
> @@ -130,7 +130,7 @@ MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
>  static inline struct mux_state *
>  devm_mux_state_get_optional(struct device *dev, const char *mux_name)
>  {
> -	if (!of_property_present(dev->of_node, "mux-states"))
> +	if (!device_property_present(dev, "mux-states"))

There's an entire saga with this function - devm_mux_state_get_optional().
Josua Mayer is preparing to move it to the MUX core, which will be a cross-tree series.
Would you mind not touching this, to avoid complicating what is already
a complicated operation? It is going away anyway, and from what I can
see in Josua's last series, its implementation from drivers/mux/core.c
is already using device property APIs:
https://lore.kernel.org/linux-phy/20260208-rz-sdio-mux-v9-2-9a3be13c1280@solid-run.com/

>  		return NULL;
>  
>  	return devm_mux_state_get(dev, mux_name);
> @@ -162,7 +162,6 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
>  	struct can_transceiver_phy *can_transceiver_phy;
>  	struct can_transceiver_priv *priv;
>  	const struct can_transceiver_data *drvdata;
> -	const struct of_device_id *match;
>  	struct phy *phy;
>  	struct gpio_desc *silent_gpio;
>  	struct gpio_desc *standby_gpio;
> @@ -171,8 +170,7 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
>  	u32 max_bitrate = 0;
>  	int err, i, num_ch = 1;
>  
> -	match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
> -	drvdata = match->data;
> +	drvdata = device_get_match_data(dev);
>  	if (drvdata->flags & CAN_TRANSCEIVER_DUAL_CH)
>  		num_ch = 2;
>  
> @@ -197,7 +195,7 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
>  		can_transceiver_phy = &priv->can_transceiver_phy[i];
>  		can_transceiver_phy->priv = priv;
>  
> -		phy = devm_phy_create(dev, dev->of_node, &can_transceiver_phy_ops);
> +		phy = devm_phy_create(dev, NULL, &can_transceiver_phy_ops);

It is not obvious why you replaced dev->of_node with NULL here.
It doesn't appear correct. You seem to be breaking OF-based PHY lookups.

>  		if (IS_ERR(phy)) {
>  			dev_err(dev, "failed to create can transceiver phy\n");
>  			return PTR_ERR(phy);
> -- 
> 2.50.1
> 
>