[PATCH] phy: move spacemit pcie driver to its subfolder

[Yixun Lan]

Hi Vinod,

On 12:12 Mon 23 Feb     , Vinod Koul wrote:
> Commit fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller")
> created spacemit subfolder with usb driver while commit 57e920b92724
> ("phy: spacemit: Introduce PCIe/combo PHY") added pcie driver in phy
> folder. Move latter into spacemit subfolder and rename file to
> phy-k1-pcie.c
> 
Make sense, this looks better, thanks

Reviewed-by: Yixun Lan <dlan at kernel.org>

> Signed-off-by: Vinod Koul <vkoul at kernel.org>
> ---
>  drivers/phy/Kconfig                                  | 12 ------------
>  drivers/phy/Makefile                                 |  1 -
>  drivers/phy/spacemit/Kconfig                         | 12 ++++++++++++
>  drivers/phy/spacemit/Makefile                        |  1 +
>  .../phy-k1-pcie.c}                                   |  0
>  5 files changed, 13 insertions(+), 13 deletions(-)
>  rename drivers/phy/{phy-spacemit-k1-pcie.c => spacemit/phy-k1-pcie.c} (100%)
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 02467dfd4fb0..c0574e44f0a3 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -134,18 +134,6 @@ config PHY_NXP_PTN3222
>  	  schemes. It supports all three USB 2.0 data rates: Low Speed, Full
>  	  Speed and High Speed.
>  
> -config PHY_SPACEMIT_K1_PCIE
> -	tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
> -	depends on ARCH_SPACEMIT || COMPILE_TEST
> -	depends on COMMON_CLK
> -	depends on HAS_IOMEM
> -	depends on OF
> -	select GENERIC_PHY
> -	default ARCH_SPACEMIT
> -	help
> -	  Enable support for the PCIe and USB 3 combo PHY and two
> -	  PCIe-only PHYs used in the SpacemiT K1 SoC.
> -
>  source "drivers/phy/allwinner/Kconfig"
>  source "drivers/phy/amlogic/Kconfig"
>  source "drivers/phy/apple/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index a648c2e02a83..2773d596e543 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -16,7 +16,6 @@ obj-$(CONFIG_PHY_SNPS_EUSB2)		+= phy-snps-eusb2.o
>  obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
>  obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
>  obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
> -obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE)	+= phy-spacemit-k1-pcie.o
>  obj-$(CONFIG_GENERIC_PHY)		+= allwinner/	\
>  					   amlogic/	\
>  					   apple/	\
> diff --git a/drivers/phy/spacemit/Kconfig b/drivers/phy/spacemit/Kconfig
> index 0136aee2e8a2..50b0005acf66 100644
> --- a/drivers/phy/spacemit/Kconfig
> +++ b/drivers/phy/spacemit/Kconfig
> @@ -2,6 +2,18 @@
>  #
>  # Phy drivers for SpacemiT platforms
>  #
> +config PHY_SPACEMIT_K1_PCIE
> +	tristate "PCIe and combo PHY driver for the SpacemiT K1 SoC"
> +	depends on ARCH_SPACEMIT || COMPILE_TEST
> +	depends on COMMON_CLK
> +	depends on HAS_IOMEM
> +	depends on OF
> +	select GENERIC_PHY
> +	default ARCH_SPACEMIT
> +	help
> +	  Enable support for the PCIe and USB 3 combo PHY and two
> +	  PCIe-only PHYs used in the SpacemiT K1 SoC.
> +
>  config PHY_SPACEMIT_K1_USB2
>  	tristate "SpacemiT K1 USB 2.0 PHY support"
>  	depends on (ARCH_SPACEMIT || COMPILE_TEST) && OF
> diff --git a/drivers/phy/spacemit/Makefile b/drivers/phy/spacemit/Makefile
> index fec0b425a948..a821a21d6142 100644
> --- a/drivers/phy/spacemit/Makefile
> +++ b/drivers/phy/spacemit/Makefile
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> +obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE)		+= phy-k1-pcie.o
>  obj-$(CONFIG_PHY_SPACEMIT_K1_USB2)		+= phy-k1-usb2.o
> diff --git a/drivers/phy/phy-spacemit-k1-pcie.c b/drivers/phy/spacemit/phy-k1-pcie.c
> similarity index 100%
> rename from drivers/phy/phy-spacemit-k1-pcie.c
> rename to drivers/phy/spacemit/phy-k1-pcie.c
> -- 
> 2.43.0
> 
> 

-- 
Yixun Lan (dlan)