[PATCH 1/3] phy: qcom: edp: Correct and clean up eDP/DP combo PHY configuration values
Yongxing Mou
yongxing.mou at oss.qualcomm.com
Tue Feb 10 02:17:07 PST 2026
On 2/9/2026 8:47 PM, Dmitry Baryshkov wrote:
> On Mon, Feb 09, 2026 at 05:52:22PM +0800, Yongxing Mou wrote:
>>
>>
>> On 2/7/2026 6:22 PM, Dmitry Baryshkov wrote:
>>> On Thu, Feb 05, 2026 at 05:20:53PM +0800, Yongxing Mou wrote:
>>>> According to the current HPG settings, most eDP/DP combo PHYs can reuse the
>>>> same configuration values.
>>>> DP mode:
>>>> -sa8775p/sc7280/sc8280xp/x1e80100
>>>> -glymur
>>>> eDP mode(low vdiff):
>>>> -glymur/sa8775p/sc8280xp/x1e80100
>>>> -sc7280
>>>> The current driver still keeps multiple versions of these tables and
>>>> doesn't fully support every combo PHY mode. This patch removes the
>>>
>>> See Documentation/process/submitting-patches.rst, "This patch".
>>>
>> Sure. got it thanks, will remove "This patch".
>>>> redundant configs and keeps only the sets we actually use, matching the
>>>> platforms listed above.
>>>
>>> Should it be combined with the 3rd patch? There you sort out all the
>>> tables, it makes more sense to review all programming together.
>>>
>> Hi, if this would help with your review work, I’m very happy to do it.
>> My original intention was to do some cleanup in this patch—correct the table
>> values so that more platforms can reuse the same table.
>
> Fixed should come before cleanups (so that they can be backported to
> stable kernels).
>
Hi, do you mean the second LDO patch should come before the first
patch?In fact, maybe three patches should go into the stable branch. The
LDO patch cannot be used on its own. On both sa8775p and hamoa, their
eDP/DP modes do not match the tables they are currently using (hamoa
should use the eDP table, while sa8775p should use the DP table). If
only the LDO patch is applied, it may cause link training to fail.
>> From Konard’s comments, it seems that the HPG table may not be the most
>> appropriate one either.
>> Maybe shoud first determine what the correct table values should be.
>
> Please follow the tables for each SKU separately (that's the 'fix'
> part).
>
Sure.
More information about the linux-phy
mailing list