[PATCH v2 04/15] drm/bridge: inno-hdmi: Split probe out of bind

[Michal Wilczynski]

inno_hdmi_bind() both sets up the bridge and attaches it to a DRM
encoder. A platform whose HDMI controller is a child of a larger device
needs the first half without the second, since it registers as its own
platform driver and lets the DRM core bind the bridge later.

Move the setup into a new exported inno_hdmi_probe(), with a matching
inno_hdmi_remove(), and reduce inno_hdmi_bind() to a wrapper around it.

No functional change intended.

Signed-off-by: Michal Wilczynski <m.wilczynski at samsung.com>
---
 drivers/gpu/drm/bridge/inno-hdmi.c | 40 +++++++++++++++++++++++++++++++++-----
 include/drm/bridge/inno_hdmi.h     |  4 ++++
 2 files changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/inno-hdmi.c b/drivers/gpu/drm/bridge/inno-hdmi.c
index 9a62bf59a4033ae9150d82a6defdd78d1f1f2fcb..12fd208d5e852cdcbdebef7853cb4143c5fe1c0f 100644
--- a/drivers/gpu/drm/bridge/inno-hdmi.c
+++ b/drivers/gpu/drm/bridge/inno-hdmi.c
@@ -1061,11 +1061,24 @@ static struct i2c_adapter *inno_hdmi_i2c_adapter(struct inno_hdmi *hdmi)
 	return adap;
 }
 
-struct inno_hdmi *inno_hdmi_bind(struct device *dev,
-				 struct drm_encoder *encoder,
-				 const struct inno_hdmi_plat_data *plat_data)
+/**
+ * inno_hdmi_probe - Internal helper to perform common setup
+ * @pdev: platform device
+ * @plat_data: SoC-specific platform data
+ *
+ * This function handles all the common hardware setup: allocating the main
+ * struct, mapping registers, getting clocks, initializing the hardware,
+ * setting up the IRQ, and initializing the DDC adapter and bridge struct.
+ * It returns a pointer to the inno_hdmi struct on success, or an ERR_PTR
+ * on failure.
+ *
+ * This function is used by modern, decoupled MFD/glue drivers. It registers
+ * the bridge but does not attach it.
+ */
+struct inno_hdmi *inno_hdmi_probe(struct platform_device *pdev,
+				  const struct inno_hdmi_plat_data *plat_data)
 {
-	struct platform_device *pdev = to_platform_device(dev);
+	struct device *dev = &pdev->dev;
 	struct inno_hdmi *hdmi;
 	int irq;
 	int ret;
@@ -1128,7 +1141,24 @@ struct inno_hdmi *inno_hdmi_bind(struct device *dev,
 	if (ret)
 		return ERR_PTR(ret);
 
-	ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	return hdmi;
+}
+EXPORT_SYMBOL_GPL(inno_hdmi_probe);
+
+struct inno_hdmi *inno_hdmi_bind(struct device *dev,
+				 struct drm_encoder *encoder,
+				 const struct inno_hdmi_plat_data *plat_data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct inno_hdmi *hdmi;
+	int ret;
+
+	hdmi = inno_hdmi_probe(pdev, plat_data);
+	if (IS_ERR(hdmi))
+		return hdmi;
+
+	ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret)
 		return ERR_PTR(ret);
 
diff --git a/include/drm/bridge/inno_hdmi.h b/include/drm/bridge/inno_hdmi.h
index 5bbcaeea94e2a20fd0dc0ae0c6946eb5604bbaf6..81da9d9bcd79db8fe26c6dff4569371e484df608 100644
--- a/include/drm/bridge/inno_hdmi.h
+++ b/include/drm/bridge/inno_hdmi.h
@@ -12,6 +12,7 @@ struct device;
 struct drm_encoder;
 struct drm_display_mode;
 struct inno_hdmi;
+struct platform_device;
 
 struct inno_hdmi_plat_ops {
 	void (*enable)(struct device *pdev, struct drm_display_mode *mode);
@@ -32,4 +33,7 @@ struct inno_hdmi_plat_data {
 struct inno_hdmi *inno_hdmi_bind(struct device *pdev,
 				 struct drm_encoder *encoder,
 				 const struct inno_hdmi_plat_data *plat_data);
+
+struct inno_hdmi *inno_hdmi_probe(struct platform_device *pdev,
+				  const struct inno_hdmi_plat_data *plat_data);
 #endif /* __INNO_HDMI__ */

-- 
2.34.1