[PATCH v7 5/7] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] Double-free and Use-After-Free of OF Node Reference
- [Medium] Initialization Ordering and Error Masking
--

commit 0733fab98743300c9bca39a083f1a901d4ff8cda
Author: Chaoyi Chen <chaoyi.chen at rock-chips.com>

phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge

Using the DRM_AUX_BRIDGE helper to create the transparent DRM bridge device.

> diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
> index d9701b6106d55..48070b50416e5 100644
> --- a/drivers/phy/rockchip/phy-rockchip-typec.c
> +++ b/drivers/phy/rockchip/phy-rockchip-typec.c
[ ... ]
> @@ -1162,16 +1163,24 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
>  
>  	for_each_available_child_of_node(np, child_np) {
>  		struct phy *phy;
> +		ret = 0;
>  
> -		if (of_node_name_eq(child_np, "dp-port"))
> +		if (of_node_name_eq(child_np, "dp-port")) {
>  			phy = devm_phy_create(dev, child_np,
>  					      &rockchip_dp_phy_ops);
> -		else if (of_node_name_eq(child_np, "usb3-port"))
> +			ret = drm_aux_bridge_register_from_node(dev, child_np);

[Severity: High]
Does this code cause a double-free of the OF node reference?

Since child_np is the loop iterator in for_each_available_child_of_node(),
its reference is automatically dropped when advancing to the next iteration.
However, drm_aux_bridge_register_from_node() assigns the OF node to the
auxiliary device without incrementing the reference count, and drops a
reference in its error paths and release function. 

Will this lead to a use-after-free when the loop iterator automatically drops
the reference, leaving the registered bridge pointing to a freed device node?

[Severity: Medium]
Also, does this sequence mask errors from devm_phy_create()?

The result of devm_phy_create() is not checked before calling
drm_aux_bridge_register_from_node(). If devm_phy_create() returns an error
pointer (such as -EPROBE_DEFER) and drm_aux_bridge_register_from_node()
fails, the original error will be permanently lost when returning 'ret'
below.

Additionally, if devm_phy_create() fails but bridge registration succeeds,
an auxiliary device is registered only to be immediately unregistered via
devres when returning PTR_ERR(phy) shortly after. Could this be avoided
by checking IS_ERR(phy) before registering the bridge?

> +		} else if (of_node_name_eq(child_np, "usb3-port"))
>  			phy = devm_phy_create(dev, child_np,
>  					      &rockchip_usb3_phy_ops);
>  		else
>  			continue;
>  
> +		if (ret) {
> +			pm_runtime_disable(dev);
> +			of_node_put(child_np);

[Severity: High]
Since drm_aux_bridge_register_from_node() already dropped the OF node
reference on its internal failure path, will calling of_node_put() here
cause an immediate double-free?

> +			return ret;
> +		}
> +
>  		if (IS_ERR(phy)) {
>  			dev_err(dev, "failed to create phy: %pOFn\n",
>  				child_np);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260828084737.565-1-kernel@airkyi.com?part=5