[PATCH 5/5] phy: qcom: snps-femto-v2: Add IPQ9650 support

[Varadarajan Narayanan]

Add the 6 nm SNPS femto USB2 PHY configuration needed by IPQ9650. The PHYs
on this SoC require a dedicated init sequence and override parameters
before they can be enabled.

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan at oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 62 +++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 5ffbe1a77dd4..c18171f9464b 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -29,12 +29,15 @@
 
 #define USB2_PHY_USB_PHY_UTMI_CTRL5		(0x50)
 #define POR					BIT(1)
+#define ATERESET				BIT(0)
 
 #define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0	(0x54)
 #define SIDDQ					BIT(2)
 #define RETENABLEN				BIT(3)
 #define FSEL_MASK				GENMASK(6, 4)
 #define FSEL_DEFAULT				(0x3 << 4)
+#define FSEL_24MHZ				(0x2 << 4)
+#define VATESTENB_MASK				GENMASK(1, 0)
 
 #define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1	(0x58)
 #define VBUSVLDEXTSEL0				BIT(4)
@@ -57,6 +60,13 @@
 #define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3		(0x78)
 #define PARAM_OVRD_MASK				0xFF
 
+#define USB2_PHY_USB_PHY_HS_PHY_TEST0		0x80
+#define TESTDATAIN_MASK				GENMASK(7, 0)
+
+#define USB2_PHY_USB_PHY_HS_PHY_TEST1		0x84
+#define TESTDATAOUTSEL				BIT(4)
+#define TESTCLK					BIT(6)
+
 #define USB2_PHY_USB_PHY_CFG0			(0x94)
 #define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN	BIT(0)
 #define UTMI_PHY_CMN_CTRL_OVERRIDE_EN		BIT(1)
@@ -78,6 +88,9 @@
 
 #define LS_FS_OUTPUT_IMPEDANCE_MASK		GENMASK(3, 0)
 
+#define USB2_PHY_USB_PHY_FSEL_SEL		0xb8
+#define FSEL_SEL				BIT(0)
+
 static const char * const qcom_snps_hsphy_vreg_names[] = {
 	"vdda-pll", "vdda33", "vdda18",
 };
@@ -328,6 +341,17 @@ static const struct override_param ls_fs_output_impedance_sc7280[] = {
 	{ 1310, 0 },
 };
 
+static const struct override_param_map ipq9650_snps_6nm_phy[] = {
+	{
+		"qcom,pre-emphasis-amplitude-bp",
+		preemphasis_amplitude_sc7280,
+		ARRAY_SIZE(preemphasis_amplitude_sc7280),
+		USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
+		PREEMPHASIS_AMPLITUDE_MASK,
+	},
+	{},
+};
+
 static const struct override_param_map sc7280_snps_7nm_phy[] = {
 	{
 		"qcom,hs-disconnect-bp",
@@ -418,6 +442,34 @@ static const struct phy_reg_config hs_5nm_phy_post[] = {
 	{ UINT_MAX, 0, 0 },
 };
 
+static const struct phy_reg_config hs_6nm_phy_pre[] = {
+	{ USB2_PHY_USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, UTMI_PHY_CMN_CTRL_OVERRIDE_EN },
+	{ USB2_PHY_USB_PHY_UTMI_CTRL5, POR, POR },
+	{ USB2_PHY_USB_PHY_FSEL_SEL, FSEL_SEL, FSEL_SEL },
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, FSEL_MASK, FSEL_24MHZ },
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, PLLBTUNE, PLLBTUNE },
+	{ USB2_PHY_USB_PHY_REFCLK_CTRL, REFCLK_SEL_MASK, REFCLK_SEL_DEFAULT },
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, VBUSVLDEXTSEL0, VBUSVLDEXTSEL0 },
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL1, VBUSVLDEXT0, VBUSVLDEXT0 },
+	{ UINT_MAX, 0, 0 },
+};
+
+static const struct phy_reg_config hs_6nm_phy_post[] = {
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, VREGBYPASS, VREGBYPASS },
+	{ USB2_PHY_USB_PHY_UTMI_CTRL5, ATERESET, 0 },
+	{ USB2_PHY_USB_PHY_HS_PHY_TEST1, TESTDATAOUTSEL, 0 },
+	{ USB2_PHY_USB_PHY_HS_PHY_TEST1, TESTCLK, 0 },
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, VATESTENB_MASK, 0 },
+	{ USB2_PHY_USB_PHY_HS_PHY_TEST0, TESTDATAIN_MASK, 0 },
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
+					 USB2_SUSPEND_N_SEL | USB2_SUSPEND_N },
+	{ USB2_PHY_USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM },
+	{ USB2_PHY_USB_PHY_UTMI_CTRL5, POR, 0 },
+	{ USB2_PHY_USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 0 },
+	{ USB2_PHY_USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0 },
+	{ UINT_MAX, 0, 0 },
+};
+
 static int qcom_snps_hsphy_init(struct phy *phy)
 {
 	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
@@ -505,6 +557,12 @@ static const struct phy_config_data hs_5nm_phy = {
 	.post = hs_5nm_phy_post,
 };
 
+static const struct phy_config_data hs_6nm_phy = {
+	.pre = hs_6nm_phy_pre,
+	.override = ipq9650_snps_6nm_phy,
+	.post = hs_6nm_phy_post,
+};
+
 static const struct phy_config_data hs_7nm_phy = {
 	.pre = hs_5nm_phy_pre,
 	.override = sc7280_snps_7nm_phy,
@@ -520,6 +578,10 @@ static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
 		.compatible	= "qcom,usb-snps-hs-5nm-phy",
 		.data		= &hs_5nm_phy,
 	},
+	{
+		.compatible	= "qcom,usb-snps-hs-6nm-phy",
+		.data		= &hs_6nm_phy,
+	},
 	{
 		.compatible	= "qcom,usb-snps-hs-7nm-phy",
 		.data		= &hs_7nm_phy,

-- 
2.34.1