[PATCH v2 08/14] arm64: dts: qcom: ipq5332: Add clocks required for USB3 support

[George Moussalem via B4 Relay]

From: Praveenkumar I <quic_ipkumar at quicinc.com>

Add aux and lfps clocks to USB controller node for Super-Speed support.

Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
Signed-off-by: George Moussalem <george.moussalem at outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 83d0377455da..664586979ec4 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -499,10 +499,14 @@ usb: usb at 8a00000 {
 
 			clocks = <&gcc GCC_USB0_MASTER_CLK>,
 				 <&gcc GCC_USB0_SLEEP_CLK>,
-				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_LFPS_CLK>;
 			clock-names = "core",
 				      "sleep",
-				      "mock_utmi";
+				      "mock_utmi",
+				      "aux",
+				      "lfps";
 
 			resets = <&gcc GCC_USB_BCR>;
 

-- 
2.53.0