[PATCH v2 11/14] arm64: dts: qcom: ipq5018: Add Super-Speed UNIPHY to USB node

[George Moussalem via B4 Relay]

From: George Moussalem <george.moussalem at outlook.com>

Add the USB3 UNIPHY node to the USB controller node.
In addition, switch to the pipe clock supplied by the USB3 UNIPHY
instead of the UTMI clock.

Signed-off-by: George Moussalem <george.moussalem at outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index c98889a7c26c..01b8181ffa40 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -631,10 +631,8 @@ usb: usb at 8a00000 {
 
 			resets = <&gcc GCC_USB0_BCR>;
 
-			phys = <&usbphy0>;
-			phy-names = "usb2-phy";
-
-			qcom,select-utmi-as-pipe-clk;
+			phys = <&usbphy0>, <&usbphy1>;
+			phy-names = "usb2-phy", "usb3-phy";
 
 			tx-fifo-resize;
 			snps,is-utmi-l1-suspend;

-- 
2.53.0