[PATCH v5 3/5] phy: snps-eusb2: Set phy type to EUSB2

[Thinh Nguyen]

On Sun, Jul 26, 2026, Krishna Kurapati wrote:
> 
> 
> On 7/25/2026 3:21 AM, Sebastian Reichel wrote:
> > Hi,
> > 
> > On Thu, Jul 23, 2026 at 04:09:06PM +0530, Krishna Kurapati wrote:
> > > USB controllers like DWC3 are agnostic of the kind of phy (USB2/eUSB2)
> > > connected to it. Set the phy type to EUSB2 to let the controller know
> > > the phy type when queried during its probe.
> > > 
> > > Signed-off-by: Krishna Kurapati <krishna.kurapati at oss.qualcomm.com>
> > > ---
> > >   drivers/phy/phy-snps-eusb2.c | 4 ++++
> > >   1 file changed, 4 insertions(+)
> > > 
> > > diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
> > > index f90bf7e95463..e139b17bcda5 100644
> > > --- a/drivers/phy/phy-snps-eusb2.c
> > > +++ b/drivers/phy/phy-snps-eusb2.c
> > > @@ -13,6 +13,8 @@
> > >   #include <linux/regulator/consumer.h>
> > >   #include <linux/reset.h>
> > > +#include <dt-bindings/phy/phy.h>
> > > +
> > >   #define EXYNOS_USB_PHY_HS_PHY_CTRL_RST	(0x0)
> > >   #define USB_PHY_RST_MASK		GENMASK(1, 0)
> > >   #define UTMI_PORT_RST_MASK		GENMASK(5, 4)
> > > @@ -597,6 +599,8 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
> > >   		return PTR_ERR(generic_phy);
> > >   	}
> > > +	phy_set_type(generic_phy, PHY_TYPE_EUSB2);
> > 
> > Isn't there a potential race condition if it's handled in this way?
> > 
> > 1. phy-snps-eusb2 probe: PHY is registered
> > 2. dwc3 probes
> > 3. phy-snps-eusb2 probe: PHY type is set
> > 
> 
> How about we do this get_type call after dwc3_probe call during
> dwc3_qcom_probe. That way we can ensure phy is up for sure since core init
> has to happen as part of dwc3_probe.
> 

There should be no race here. The phy_set_type() is called before the
phy is registered. dwc3-qcom would get -EPROBE_DEFER if it probes before
the phy is registered.

BR,
Thinh