[PATCH V4 0/2] arm64: dts: qcom: Shikra SD Card support

[Monish Chunara]

This is v4 of the Shikra SD Card support series.

This series adds SD card support for the Shikra platform.

The first patch adds the SDHC2 controller node and the necessary pinctrl
configurations to the base Shikra SoC dtsi. The second patch enables 
this support on the Shikra EVK (CQS, CQM, and IQS variants) by defining
the regulator supplies and the card detection GPIO.

Signed-off-by: Monish Chunara <monish.chunara at oss.qualcomm.com>

Changes in v4:
- Rebase on latest code base
- Collect Reviewed-by tags (Konrad)
- Drop the dependency link - since all base changes are merged

Changes in v3:
- Padded the address part of the reg property in the sdhc_2 node to
  8 hex digits with leading zeroes for consistency with other nodes
  in the file
- Moved the common sdhc_2 properties to shikra-evk DT file
- Link to v2: https://lore.kernel.org/all/20260630165700.1886608-1-monish.chunara@oss.qualcomm.com

Changes in v2:
- Rectify the alignment for clocks and interconnect properties for SD
  card
- Link to v1: https://lore.kernel.org/all/20260604122045.494712-1-monish.chunara@oss.qualcomm.com

Testing:
- Validated on Shikra EVK variants.  

Monish Chunara (2):
  arm64: dts: qcom: Add SD Card support for Shikra SoC
  arm64: dts: qcom: Enable SD card for Shikra EVK

 arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts |  9 ++
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts |  9 ++
 arch/arm64/boot/dts/qcom/shikra-evk.dtsi    | 11 +++
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts |  9 ++
 arch/arm64/boot/dts/qcom/shikra.dtsi        | 97 +++++++++++++++++++++
 5 files changed, 135 insertions(+)

-- 
2.34.1