[PATCH v2 4/6] arm64: dts: qcom: lemans-ride-common: fix SerDes PHY regulator supplies

[Mohd Ayaan Anwar]

Both SerDes PHY nodes were configured with 'phy-supply = <&vreg_l5a>',
which was incorrect on two counts: vreg_l5a is not a supply the PHY
requires, and only one rail was described where the hardware needs two.

The PHY requires vdda-0p9 (vreg_l4a) and vdda-1p2 (vreg_l1c). Replace
the incorrect phy-supply with these two named properties on both nodes.

Fixes: 5ef26fb8b3ed ("arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY")
Signed-off-by: Mohd Ayaan Anwar <mohd.anwar at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index cefb8ff0080631e25e9dd3a05cd810c6955bf1fe..923fd8736f31df2eb5198b27ddf52c171f7b2943 100644
--- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -856,12 +856,16 @@ &qup_uart17_rx {
 };
 
 &serdes0 {
-	phy-supply = <&vreg_l5a>;
+	vdda-0p9-supply = <&vreg_l4a>;
+	vdda-1p2-supply = <&vreg_l1c>;
+
 	status = "okay";
 };
 
 &serdes1 {
-	phy-supply = <&vreg_l5a>;
+	vdda-0p9-supply = <&vreg_l4a>;
+	vdda-1p2-supply = <&vreg_l1c>;
+
 	status = "okay";
 };
 

-- 
2.34.1