[PATCH] phy: sunplus: fix error handling in sp_uphy_init()

[Felix Gu]

Fix the error paths of sp_uphy_init() to undo exactly what each stage
did: return directly if clk_prepare_enable() fails, release only the clock
if reset_control_deassert() fails, and jump to err_reset if
update_disc_vol() fails so the clock and reset are not leaked.

Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Felix Gu <ustc.gu at gmail.com>
---
 drivers/phy/sunplus/phy-sunplus-usb2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/sunplus/phy-sunplus-usb2.c b/drivers/phy/sunplus/phy-sunplus-usb2.c
index 637a5fbae6d9..0ad4c7160d17 100644
--- a/drivers/phy/sunplus/phy-sunplus-usb2.c
+++ b/drivers/phy/sunplus/phy-sunplus-usb2.c
@@ -116,11 +116,11 @@ static int sp_uphy_init(struct phy *phy)
 
 	ret = clk_prepare_enable(usbphy->phy_clk);
 	if (ret)
-		goto err_clk;
+		return ret;
 
 	ret = reset_control_deassert(usbphy->rstc);
 	if (ret)
-		goto err_reset;
+		goto err_clk;
 
 	/* Default value modification */
 	writel(HIGH_MASK_BITS | 0x4002, usbphy->moon4_regs + UPHY_CONTROL0);
@@ -129,7 +129,7 @@ static int sp_uphy_init(struct phy *phy)
 	/* disconnect voltage */
 	ret = update_disc_vol(usbphy);
 	if (ret < 0)
-		return ret;
+		goto err_reset;
 
 	/* board uphy 0 internal register modification for tid certification */
 	val = readl(usbphy->phy_regs + CONFIG9);

---
base-commit: 415606a7be939835db9b0d6b711887586646346d
change-id: 20260803-sunplus-usb3-ba6c829bc063

Best regards,
--  
Felix Gu <ustc.gu at gmail.com>