[PATCH 0/2] riscv: spacemit: Add K3 PCIe/USB comb phy support

[Inochi Amaoto]

The PCIe/USB comb phy on K3 is a big phy that contains multiple
standalone phys for each PCIe and USB controllers. This phy is
required to configure a syscon device for mux configuration and
calibration.

Inochi Amaoto (2):
  dt-bindings: phy: Add Spacemit K3 USB3/PCIe comb phy support
  phy: spacemit: Add USB3/PCIe comb PHY driver for Spacemit K3

 .../bindings/phy/spacemit,k3-comb-phy.yaml    |  63 +++
 drivers/phy/spacemit/Kconfig                  |  16 +
 drivers/phy/spacemit/Makefile                 |   2 +
 drivers/phy/spacemit/phy-k3-combphy.c         | 250 +++++++++++
 drivers/phy/spacemit/phy-k3-common.c          | 398 ++++++++++++++++++
 drivers/phy/spacemit/phy-k3-common.h          |  27 ++
 6 files changed, 756 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/spacemit,k3-comb-phy.yaml
 create mode 100644 drivers/phy/spacemit/phy-k3-combphy.c
 create mode 100644 drivers/phy/spacemit/phy-k3-common.c
 create mode 100644 drivers/phy/spacemit/phy-k3-common.h

--
2.54.0