[PATCH v4 16/16] phy: rockchip: usbdp: Use guard functions for mutex

[Sebastian Reichel]

Convert the driver to use guard functions for mutex handling as
a small cleanup. There is a small functional change in the DP PHY
power up function, which no longer sleeps if the internal powerup
code returns an error. This is not a problem as the sleep is only
relevant for successful power-up.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 60 ++++++++++++++-----------------
 1 file changed, 27 insertions(+), 33 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 17637d92cf9b..f318b04c097d 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -10,6 +10,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <linux/bitfield.h>
 #include <linux/bits.h>
+#include <linux/cleanup.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
@@ -654,14 +655,15 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
 	struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
 	bool flipped = orien == TYPEC_ORIENTATION_REVERSE;
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
 
 	if (orien == TYPEC_ORIENTATION_NONE) {
 		gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
 		gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0);
 		/* unattached */
 		rk_udphy_usb_bvalid_enable(udphy, false);
-		goto unlock_ret;
+
+		return 0;
 	}
 
 	if (udphy->flip != flipped)
@@ -671,8 +673,6 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
 	rk_udphy_set_typec_default_mapping(udphy);
 	rk_udphy_usb_bvalid_enable(udphy, true);
 
-unlock_ret:
-	mutex_unlock(&udphy->mutex);
 	return 0;
 }
 
@@ -1044,12 +1044,10 @@ static int rk_udphy_dp_phy_init(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
 
 	udphy->dp_in_use = true;
 
-	mutex_unlock(&udphy->mutex);
-
 	return 0;
 }
 
@@ -1057,9 +1055,10 @@ static int rk_udphy_dp_phy_exit(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
+
 	udphy->dp_in_use = false;
-	mutex_unlock(&udphy->mutex);
+
 	return 0;
 }
 
@@ -1068,26 +1067,25 @@ static int rk_udphy_dp_phy_power_on(struct phy *phy)
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 	int ret;
 
-	mutex_lock(&udphy->mutex);
+	scoped_guard(mutex, &udphy->mutex) {
+		phy_set_bus_width(phy, udphy->dp_lanes);
 
-	phy_set_bus_width(phy, udphy->dp_lanes);
-
-	ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
-	if (ret)
-		goto unlock;
+		ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
+		if (ret)
+			return ret;
 
-	rk_udphy_dp_lane_enable(udphy, udphy->dp_lanes);
+		rk_udphy_dp_lane_enable(udphy, udphy->dp_lanes);
 
-	rk_udphy_dp_lane_select(udphy);
+		rk_udphy_dp_lane_select(udphy);
+	}
 
-unlock:
-	mutex_unlock(&udphy->mutex);
 	/*
 	 * If data send by aux channel too fast after phy power on,
 	 * the aux may be not ready which will cause aux error. Adding
 	 * delay to avoid this issue.
 	 */
 	usleep_range(10000, 11000);
+
 	return ret;
 }
 
@@ -1095,10 +1093,10 @@ static int rk_udphy_dp_phy_power_off(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
+
 	rk_udphy_dp_lane_enable(udphy, 0);
 	rk_udphy_power_off(udphy, UDPHY_MODE_DP);
-	mutex_unlock(&udphy->mutex);
 
 	return 0;
 }
@@ -1302,19 +1300,18 @@ static const struct phy_ops rk_udphy_dp_phy_ops = {
 static int rk_udphy_usb3_phy_init(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
-	int ret = 0;
+	int ret;
+
+	guard(mutex)(&udphy->mutex);
 
-	mutex_lock(&udphy->mutex);
 	/* DP only or high-speed, disable U3 port */
 	if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) {
 		rk_udphy_u3_port_disable(udphy, true);
-		goto unlock;
+		return 0;
 	}
 
 	ret = rk_udphy_power_on(udphy, UDPHY_MODE_USB);
 
-unlock:
-	mutex_unlock(&udphy->mutex);
 	return ret;
 }
 
@@ -1322,15 +1319,14 @@ static int rk_udphy_usb3_phy_exit(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
+
 	/* DP only or high-speed */
 	if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs)
-		goto unlock;
+		return 0;
 
 	rk_udphy_power_off(udphy, UDPHY_MODE_USB);
 
-unlock:
-	mutex_unlock(&udphy->mutex);
 	return 0;
 }
 
@@ -1345,12 +1341,10 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 {
 	struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
 
 	rk_udphy_set_typec_state(udphy, state->mode);
 
-	mutex_unlock(&udphy->mutex);
-
 	return 0;
 }
 

-- 
2.53.0