[PATCH v22 5/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY

[Luca Ceresoli]

Hello Laurentiu,

On Fri Apr 24, 2026 at 1:07 PM CEST, Laurentiu Palcu wrote:
> From: Sandor Yu <Sandor.yu at nxp.com>
>
> Add bindings for Freescale iMX8MQ DP and HDMI PHY.
>
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu at oss.nxp.com>
> ---
>  .../bindings/phy/fsl,imx8mq-hdptx-phy.yaml         | 80 ++++++++++++++++++++++
>  1 file changed, 80 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-hdptx-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-hdptx-phy.yaml
> new file mode 100644
> index 0000000000000..a24435139b8b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-hdptx-phy.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,imx8mq-hdptx-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cadence HDP-TX DP/HDMI PHY for Freescale i.MX8MQ SoC
> +
> +maintainers:
> +  - Sandor Yu <sandor.yu at nxp.com>

Based on what you said in the cover, I guess this line will have to be
changed. Are you willing to maintain this binding?

> +description:
> +  The Cadence HDP-TX DP/HDMI PHY is a child node of the MHDP8501 bridge,
> +  sharing the same MMIO region as the parent bridge node.
> +
> +properties:
> +  compatible:
> +    const: fsl,imx8mq-hdptx-phy
> +
> +  clocks:
> +    items:
> +      - description: PHY reference clock.
> +      - description: APB clock.
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: apb
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mq-clock.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    display-bridge at 32c00000 {
> +        compatible = "fsl,imx8mq-mhdp8501";
> +        reg = <0x32c00000 0x100000>;
> +        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "plug_in", "plug_out";
> +        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> +        phys = <&dp_phy>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;

The ports are not mentioned in the properties. I'm not a DT maintainer, but
I think they should, e.g. to mention which port is the input and which is
the output.

> +
> +            port at 0 {
> +                reg = <0>;
> +                endpoint {
> +                    remote-endpoint = <&dcss_out>;
> +                };
> +            };
> +
> +            port at 1 {
> +                reg = <1>;
> +                endpoint {
> +                    data-lanes = <2 1 0 3>;

Having a remote-endpoint property would be nice here, to make the example
more complete.

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com