[PATCH v5 0/6] phy: realtek: usb2: support for RTL9607C USB2 PHY

[Rustam Adilov]

On 2026-04-21 07:09, Krzysztof Kozlowski wrote:
> On Tue, Apr 21, 2026 at 12:19:35AM +0500, Rustam Adilov wrote:
>> This patch series for Realtek USB2 PHY driver adds support for RTL9607C
>> USB2 PHY.
>> 
>> RTL9607C is a big endian MIPS CPU which is quite far from RTD series SoCs
>> supported by realtek usb2 phy driver, but the phy initilization is found
>> to be very indentical in most areas.
>> 
>> Most of the code was based on the Realtek's usb driver from the GPL tarball
>> in [1] and adjusted to fit into the realtek usb2 phy driver code format.
>> 
>> The patch series was split into smaller patches that add/change something
>> in the driver that are not exactly related to RTL9607C and that also
>> helps for easier review. That also means, patch 5 depends on all the prior
>> patches that come before it.
>> 
>> USB2 PHY on RTL9607C is primarly used for its internal OHCI/EHCI controllers.
>> 
>> [1] - https://github.com/jameywine/GPL-for-GP3000/blob/main/linux-5.10.x/arch/mips/rtl9607c/usb.c
>> 
>> ---
>> Changelog in v5:
>> Mostly addressing LLM review
>> - Patch 1
>>  - changed int to u32 type for new_reg_req and vstatus_busy data fields.
>>  - changed comments in rtk_phy_read/write from PHY_NEW_REG_REQ to phy_reg->new_reg_req.
>> - Patch 2
>>  - explained readl/writel native endianess issue in more detail.
>>  - explained why vstatus register doesn't need byte swapping.
>> - Patch 4
>>  - moved reset_control_deassert to rtk_phy_init function to keep it outside of for loop.
>>  - changed msleep(5) to usleep_range(5000, 6000).
>>  - explained why reset_control_assert is not needed.
>> - Patch 5
>>  - explained readl/writel native endianess issue here as well.
>>  - explained why FORCE_DISCONNECT_REG doesn't need byte swapping.
>> - Link to v4: https://lore.kernel.org/linux-phy/20260406181228.25892-1-adilov@disroot.org/
>> 
>> Changelog in v4:
>> - Patch 2
>>  - moved the le variations of read/write functions to Patch 5 where it is actually used because
>>    otherwise, it results in unused errors when only Patch 2 is applied.
>>  - updated the commit message to to point the reason for le32 wrappers around readl/writel.
>> - Patch 3
>>  - added "Reviewed by Krzysztof Kozlowski"
> 
> Where?

Oi, it must have been lost in transmission because i added the tag manually to .patch after
format-patch command instead of adding it to commit message. So it disappeared in v5.

Sorry about that. Unintentional blunder on my part.

> Best regards,
> Krzysztof

Thanks,
Rustam