[PATCH v3 1/2] phy: qcom: edp: Add eDP/DP mode switch support

[Yongxing Mou]

On 4/20/2026 8:49 PM, Konrad Dybcio wrote:
> On 4/20/26 2:48 PM, Yongxing Mou wrote:
>>
>>
>> On 4/16/2026 5:34 PM, Konrad Dybcio wrote:
>>> On 3/2/26 9:28 AM, Yongxing Mou wrote:
>>>> The eDP PHY supports both eDP&DP modes, each requires a different table.
>>>> The current driver doesn't fully support every combo PHY mode and use
>>>> either the eDP or DP table when enable the platform. In addition, some
>>>> platforms mismatch between the mode and the table where DP mode uses
>>>> the eDP table or eDP mode use the DP table.
>>>>
>>>> Clean up and correct the tables for currently supported platforms based on
>>>> the HPG specification.
>>>>
>>>> Here lists the tables can be reused across current platforms.
>>>> DP mode：
>>>>      -sa8775p/sc7280/sc8280xp/x1e80100
>>>>      -glymur
>>>> eDP mode(low vdiff):
>>>>      -glymur/sa8775p/sc8280xp/x1e80100
>>>>      -sc7280
>>>>
>>>> Cc: stable at vger.kernel.org
>>>> Fixes: f199223cb490 ("phy: qcom: Introduce new eDP PHY driver")
>>>> Signed-off-by: Yongxing Mou <yongxing.mou at oss.qualcomm.com>
>>>> ---
>>>
>>> I went through everything and all the sequences are OK.
>>>
>>> SC8180X will need changes, but it's already incorrect so this
>>> doesn't necessarily affect it
>>>
>>> Thanks!
>>>
>>> Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
>>>
>>> Konrad
>> Thanks here.. I didn’t notice before that SC8180X is different from SC7280, and will correct it in the next version.
> 
> Please make it another patch on top of these two, so that we don't have
> to re-validate the existing diff
> 
> Konrad
Thanks very much for the validating this patch. Could you sync with 
Dmitry how i post next patch?... He suggest me to splite this patch...