[PATCH v4 2/7] dt-bindings: phy: rockchip: rk3399-typec-phy: Support mode-switch

[Chaoyi Chen]

Hi Dmitry,

On 9/23/2025 9:12 AM, Dmitry Baryshkov wrote:
> On Mon, Sep 22, 2025 at 09:20:34AM +0800, Chaoyi Chen wrote:
>> From: Chaoyi Chen <chaoyi.chen at rock-chips.com>
>>
>> The RK3399 SoC integrates two USB/DP combo PHYs, each of which
>> supports software-configurable pin mapping and DisplayPort lane
>> assignment. These capabilities enable the PHY itself to handle both
>> mode switching and orientation switching, based on the Type-C plug
>> orientation and USB PD negotiation results.
>>
>> While an external Type-C controller is still required to detect cable
>> attachment and report USB PD events, the actual mode and orientation
>> switching is performed internally by the PHY through software
>> configuration. This allows the PHY to act as a Type-C multiplexer for
>> both data role and DP altmode configuration.
>>
>> To reflect this hardware design, this patch introduces a new
>> "mode-switch" property for the dp-port node in the device tree bindings.
>> This property indicates that the connected PHY is capable of handling
>> Type-C mode switching itself.
>>
>> Signed-off-by: Chaoyi Chen <chaoyi.chen at rock-chips.com>
>>
>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>> ---
>>
>> Changes in v4:
>> - Remove "|" in description.
>>
>> Changes in v3:
>> - Add more descriptions to clarify the role of the PHY in switching.
>>
>> Changes in v2:
>> - Reuse dp-port/usb3-port in rk3399-typec-phy binding.
>>
>>   .../devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml  | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml
>> index 91c011f68cd0..83ebcde096ea 100644
>> --- a/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml
>> +++ b/Documentation/devicetree/bindings/phy/rockchip,rk3399-typec-phy.yaml
>> @@ -51,6 +51,12 @@ properties:
>>         '#phy-cells':
>>           const: 0
>>   
>> +      mode-switch:
> Having the mode-switch here is a bit strange. I think the whole PHY
> device should be an orientation-switch and mode-switch. Otherwise it
> feels weird to me.

I think this is a difference in practice. In the previous binding, there was already an orientation-switch under the usb-port. I trying to add both an orientation-switch and a mode-switch to the top-level device in v2. And Krzysztof reminded me that adding a mode-switch under the dp-port would be better, so I changed it to the current form :)



>
>> +        description:
>> +          Indicates the PHY can handle altmode switching. In this case,
>> +          requires an external USB Type-C controller to report USB PD message.
>> +        type: boolean
>> +
>>         port:
>>           $ref: /schemas/graph.yaml#/properties/port
>>           description: Connection to USB Type-C connector
>> -- 
>> 2.49.0
>>
-- 
Best,
Chaoyi