[PATCH v8 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible

[Pritam Manohar Sutar]

Hi Krzysztof,

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk at kernel.org>
> Sent: 19 September 2025 05:59 AM
> To: Pritam Manohar Sutar <pritam.sutar at samsung.com>; vkoul at kernel.org;
> kishon at kernel.org; robh at kernel.org; krzk+dt at kernel.org;
> conor+dt at kernel.org; alim.akhtar at samsung.com; andre.draszik at linaro.org;
> peter.griffin at linaro.org; kauschluss at disroot.org;
> ivo.ivanov.ivanov1 at gmail.com; igor.belwon at mentallysanemainliners.org;
> m.szyprowski at samsung.com; s.nawrocki at samsung.com
> Cc: linux-phy at lists.infradead.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-samsung-
> soc at vger.kernel.org; rosa.pila at samsung.com; dev.tailor at samsung.com;
> faraz.ata at samsung.com; muhammed.ali at samsung.com;
> selvarasu.g at samsung.com
> Subject: Re: [PATCH v8 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add
> ExynosAutov920 HS phy compatible
> 
> On 18/09/2025 20:55, Pritam Manohar Sutar wrote:
> >
> > Yes, we have already discussed this and convergence was to use the
> > conventions which are mentioned in the Data-book. So, I updated the
> > supply names accordingly.
> >
> > Please see the below communications for the same.
> >
> > https://lore.kernel.org/linux-phy/83dc9435-5850-425d-b345-52e84ef9262c
> > @kernel.org/
> > https://lore.kernel.org/linux-phy/6e1c67d2-9bfa-442a-9d53-8c5970a2a9ef
> > @kernel.org/
> Ah, ok, although next time I might ask the same, since commit msg does not
> explain that.

Ok, will update commit message. 
Please confirm the commit message if I updated it as below.  

"dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy compatible

Document support for the USB20 phy found on the ExynosAutov920 SoC. The
USB20 phy is functionally identical to that on the Exynos850 SoC, so no
driver changes are needed to support this phy. However, add a dedicated
compatible string for USB20 phy found in this SoC.

This phy needs 0.75v, 0.18v and 3.3v supplies for its internal 
functionally. Power Supply's names are as per phy's User Data-Book.
These names, (dvdd, vdd18 and vdd33), are considered  for 0.75v, 1.8v 
and 3.3v respectively.  
"

> 
> I still cannot find constraints for the rest of properties, though.

Sorry I didn't get it completely. Can you please elaborate on the same? 

Let me know if you want me to update the commit message 
and send v9? And retain your RB on patch1 and patch3?

> Best regards,
> Krzysztof

Thank you.

Regards,
Pritam