[PATCH 30/38] arm64: dts: mediatek: pumpkin-common: Fix pinctrl node names

[Matthias Brugger]

On 24/07/2025 10:39, AngeloGioacchino Del Regno wrote:
> Fix the pinctrl node names to adhere to the bindings, as the main
> pin node is supposed to be named like "uart0-pins" and the pinmux
> node named like "pins-bus".
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Applied, thanks

> ---
>   .../boot/dts/mediatek/pumpkin-common.dtsi      | 18 +++++++++---------
>   1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> index a356db5fcc5f..805fb82138a8 100644
> --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> @@ -198,8 +198,8 @@ &usb_phy {
>   };
>   
>   &pio {
> -	gpio_keys_default: gpiodefault {
> -		pins_cmd_dat {
> +	gpio_keys_default: gpio-keys-pins {
> +		pins-cmd-dat {
>   			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
>   				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
>   			bias-pull-up;
> @@ -207,7 +207,7 @@ pins_cmd_dat {
>   		};
>   	};
>   
> -	i2c0_pins_a: i2c0 {
> +	i2c0_pins_a: i2c0-pins {
>   		pins1 {
>   			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
>   				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
> @@ -215,7 +215,7 @@ pins1 {
>   		};
>   	};
>   
> -	i2c2_pins_a: i2c2 {
> +	i2c2_pins_a: i2c2-pins {
>   		pins1 {
>   			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
>   				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
> @@ -223,21 +223,21 @@ pins1 {
>   		};
>   	};
>   
> -	tca6416_pins: pinmux_tca6416_pins {
> -		gpio_mux_rst_n_pin {
> +	tca6416_pins: tca6416-pins {
> +		pins-mux-rstn {
>   			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
>   			output-high;
>   		};
>   
> -		gpio_mux_int_n_pin {
> +		pins-mux-intn {
>   			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
>   			input-enable;
>   			bias-pull-up;
>   		};
>   	};
>   
> -	ethernet_pins_default: ethernet {
> -		pins_ethernet {
> +	ethernet_pins_default: ethernet-pins {
> +		pins-eth {
>   			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
>   				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
>   				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,